Abstract:The manufacturing process is inevitably accompanied with the production of scraps, which leads to resource waste and environmental pollution. Recycling and remanufacturing are the most commonly used approaches for metal scraps due to their well-established advantages from economic and environmental perspectives. In this study, spinning experiments with 2195 Al-Li alloy tailor welded blanks produced by friction stir welding from metal scraps were conducted under different process parameter designs. And then the effects of various process parameters on spinning of thin-walled curved surface parts were systematically studied. The results of the corresponding experimental groups show that the roller attack angle, the spinning clearance, and the installation method of tailor welded blanks have the most significant effect on the weld torsion angle. In addition, it was found that along the longitude direction of spun parts, the surface roughnesses of the weld of spun parts were greatly improved under the roller nose radius of 10 mm, the spinning clearance of 1.0 mm, the constant linear velocity, and the installation method of tailor welded blanks (the lower surface of tailor welded blanks is spun by rollers), while the process parameters have little significant effect on the surface roughness along the latitude direction of spun parts. Furthermore, it can be concluded that the forming profiles of spun parts fitted the mandrel well under the roller nose radius of 6 mm, double rollers, the roller attack angle of 30° and 45°, spinning clearance of 1.5 mm, and the installation method of tailor welded blanks (the upper surface of tailor welded blanks is spun by rollers). The research results will provide guidance for the precise spinning of thin-walled curved surface parts with tailor welded blanks. Thereby, it is also beneficial for green manufacturing involving recycling and remanufacturing of metal scraps.

Research on neck-spinning process of 3D non-axisymmetric tubes

Plasticity Improvement of Ball-Spun Magnesium Alloy Tube Based on Stress Triaxiality

Study of Dieless Radial Spinning for Thick-Walled Cylindrical Parts With External Grooves

A Systematic Study on the Effects of Process Parameters on Spinning of Thin-Walled Curved Surface Parts With 2195 Al-Li Alloy Tailor Welded Blanks Produced by FSW

Spinning Process of 2219 Aluminum Alloy Tubes for Used in Hydroforming

Effects of Forming Parameters on Deformation Uniformity of Thin-walled Parts during Multi-pass Spinning

Research on Design Method of Variable Thickness Blanks for Aluminum Alloy Head Spinning Forming

Study on Counter-Roller Spinning Technology of Large Diameter Aluminum Alloy Cylindrical Parts

Numerical simulation and experimental study on non-axisymmetric spinning with a groove at the middle of the tube

Study of Deformation Mechanism of Backward Ball Spinning of Thin-Walled Tube with Longitudinal Inner Ribs

Study on the spinning process of thin-walled aluminum alloy vessel head

Research on Material Flow Rule of Backward Tube Spinning Process

Process factors influencing spinning deformation of thin-walled tubular part with longitudinal inner ribs

Numerical Simulation Research on A New Spinning Process: Double-Roller Clamping Spinning Process

The Analytical Model of Ball-Spinning Force for Processing an Annular Groove on the Inner Wall of a Steel Tube

Research on a New Counter-Roller Active Spinning Process for Forming Al Alloy Thin-Walled Cylinders

Technology Optimization Analysis of Three-Roll Rotary Piercing Process for Seamless Steel Pipe

Effect of Multi-Pass Power Spinning on Microstructure Homogenization and Mechanical-Property Strengthening of Ti2AlNb-Based Alloy Using Welded Tube Blank

Experimental Investigation of Current Intensity and Feed Speed in Electrically Assisted Necking and Thickening of 5A02 Aluminum Alloy Tubes

Research of Net-Shape Power Spinning Technology for Poly-V Grooved Aluminum Pulley

Analysis of ball spinning formability of thin-walled tubular parts of aluminum alloy