Abstract:Complex multi-azeotrope and multi-boundary lead to immense challenges of solvent selection for the separation of the ternary multi-azeotrope system. In principle, integrating reactive distillation (RD) with extractive distillation (ED) is fundamental to achieve higher energy efficiencies and to reduce process expenses and environmental impacts. However, these hybrid distillation processes that can overcome the challenges have not been fully investigated. To this end, this article developed and compared the energy-saving reactive-extractive hybrid distillation processes for purification and recovery of the high-value ethyl acetate and EtOH from the wastewater containing multi-azeotrope. The proposed hybrid distillation processes include triple-column reactive-ED (TCRED), double-column reactive-ED (DCRED). In the hybrid processes, ethylene glycol (EG) and dimethyl sulfoxide (DMSO) are adopted as solvents in the ED, while ethylene oxide is introduced as reactant to perform the hydration reaction in the RD process. These separation schemes are optimized with the objective of the minimum total annual costs (TAC) via genetic algorithm procedure to obtain the optimal design parameters. Subsequently, environmental assessment indicator (CO2 emissions) is also calculated to perform the comprehensive analysis for the presented separation processes. The results demonstrate that the hybrid distillation processes coupled with RD can significantly reduce process costs as well as CO2 emissions compared to the conventional TCED process, especially for the DCRED process. The DCRED scheme with EG as solvent has the lowest TAC and CO2 emissions, with a reduction of 43.29%/35.10% TAC and 38.06%/24.73% CO2 emissions compared with the TCRED configurations with EG or DMSO as solvents, respectively. The major contributions of this work are to facilitate the future development for conceptual design of the hybrid distillation processes containing RD.

Technical Analysis on Cleaner Production of High Purity Dimeric Acid

Study on Cleaning Technology and Membrane Separation of DL-α-alanine Synthesis

Synthesis of 1,1-Cyclohexanediacetic Acid Catalyzed by Dilute Sulfuric Acid in High-Temperature Liquid Water

The Advances of Preparation Technologies of DL-α-Alanine and Its Application

Complex extraction and stripping of H acid wastewater

Technical Analysis of Clean Production in Polyurethane Crosslinker

Recovery of Fumaric Acid from Industrial Wastewater by Chemical Extraction and Stripping

Novel Purification of Oily Process Water from Ethylene Production at Pilot Scale

Study on Production Process of High Salinity Fumaric Acid Waster Liquid Recycling Fumaric Acid

Production Process and Industrial Utilization Technology for the Mother Solution of Chloroacetic Acid

Three-phase crystallization for purification of acrylic acid from acrylic/propionic acid mixture

Novel process development and mechanism analysis of purification of polymer monomers by combining pressure swing distillation and extraction distillation

Process design and optimization of the efficient production of butyl acrylate by reactive azeotropic distillation/pervaporation using different feed ratios

CLEANER PRODUCTION EVALUATION OF TWO CITRIC ACID PRODUCTION TECHNOLOGIES

Cleaner production of citric acid by recycling its extraction wastewater treated with anaerobic digestion and electrodialysis in an integrated citric acid-methane production process

Thermodynamic Analysis and Process Simulation of an Industrial Acetic Acid Dehydration System Via Heterogeneous Azeotropic Distillation

Design and 4E analysis of heat pump-assisted extractive distillation processes with preconcentration for recovering ethyl-acetate and ethanol from wastewater

Sustainable Wastewater Treatment Via PV-distillation Hybrid Process for the Separation of Ethyl Acetate/isopropanol/water

Technology and Optimization on Enhancing the Quality of 1,2-Dichloroethane

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration

Pilot Test for the Purification and Utilisation of Process Water in Ethane Steam Cracking for Ethylene Production