Numerical assessment of particle deposition reduction in turbulent bend pipe flow with a rib insertion
Fatima Zahrae Erraghroughi,Abdellah Bah,Anas El Maakoul,Abdellatif Ben Abdellah
DOI: https://doi.org/10.1016/j.ijheatfluidflow.2024.109290
IF: 2.643
2024-01-20
International Journal of Heat and Fluid Flow
Abstract:Particle accumulation within curved pipes poses an ongoing challenge across various engineering and industrial applications. This research aims to explore the particle deposition within a 90° circular curved pipe when a rib is introduced, employing the Eulerian-Lagrangian methodology within ANSYS Fluent. The chosen operational conditions involve a turbulent flow with a Reynolds number of 10,000. The particle size range under consideration is from 3 μm to30 μm corresponding to a Stokes number range from 0.11 to 10.14. The reliability of the model is ensured by comparing the particle deposition behavior with previous experimental data. Following validation, the rib is placed at different angular positions (θ), and its impact on deposition efficiency is investigated. Additionally, the influence of bend curvature ratio, rib height, and rib width were evaluated. The findings reveal an anti-deposition effect observed in cases with θ values of 5° and 75°. Installing the rib at θ = 5° leads to a maximum reduction in deposition of 6 % for a St value of 0.1 and a reduction of 21 % for St values greater than or equal to 1.3. In contrast, for St values ranging from 0.1 to 1.3, θ = 75° demonstrates the most optimal configuration in reducing deposition, achieving a maximum reduction of 13 %.
engineering, mechanical,thermodynamics,mechanics