Influence of frequency of voltage applied on the propagation characteristics of electrical trees in XLPE cable insulation

Xie An-Sheng,Li Sheng-Tao

2006-01-01

Abstract:In this paper the structures and propagation characteristics of electrical trees under high voltage of 50-2000Hz in the cross-linked polyethylene(XLPE) cable insulation samples are studied.It is found that there are three kinds of electrical trees,the branch-like tree,mixed tree combining branch with jungle,and pure jungle-like trees,that will appeared in the sample when frequency is less than 250Hz due to non-uniform crystallization and micro-defects concentrated in XLPE cable insulation.Only one kind of electrical tree,the dense branch-like trees,will be developed when frequency is equal to or higher than 500Hz. The propagation mechanisms of these kinds of electrical trees are mainly decided by crystalline state of the dielectric and the frequency of voltage applied.The structures and propagation characteristics of electrical trees is closely related to aggregation state of material in low frequency,and is nothing to do with the aggregation state of material at high frequency.The propagation law of electrical trees in XLPE cable insulation at high frequency is similar as in epoxy resin and PMMA.The propagation characteristics of electrical trees not only depends upon the crystal-boundary and microspore in amorphous interface,but also depends upon the impurity concentration and the relative position between electrode tip and sphere-crystals or amorphous region in low frequency.Because the processes of injection and elicitation charge from and to dielectric by electrode are more violent at high frequency than at low frequency,it can form relatively uniform dielectric weak region at the front of needle electrode,so the initiation and propagation law of electrical trees at high frequency is similar each other.