Abstract:This study verifies the effects of deployment parameters on the safe separation of Autonomous Underwater Vehicles (AUVs) and mission payloads. The initial separation phase is meticulously modeled based on computational fluid dynamics (CFD) simulations employing the cubic constitutive Shear Stress Transport (SST) k-ω turbulence model and overset grid technologies. This phase is characterized by a 6-degree-of-freedom (6-DOF) framework incorporating Dynamic Fluid-Body Interaction (DFBI), supported by empirical validation. The SST k-ω turbulence model demonstrates superior performance in managing flows characterized by adverse pressure gradients and separation. DFBI entails computationally modeling fluid–solid interactions during motion or deformation. The utilization of overset grids presents several advantages, including enhanced computational efficiency by concentrating computational resources solely on regions of interest, simplified handling of intricate geometries and moving bodies, and adaptability in adjusting grids to accommodate changing simulation conditions. This research analyzes mission payloads' trajectories and attitude adjustments after release from AUVs under various cruising speeds and initial release dynamics, such as descent and angular velocities. Additionally, this study evaluates the effects of varying ocean currents at different depths on separation safety. Results indicate that the interaction between AUVs and mission payloads during separation increases under higher navigational speeds, reducing the separation speed and degrading the stability. As the initial drop velocities increase, fast transition through the AUV's immediate flow field promotes separation. The core of this process is the initial pitch angle management upon deployment. Optimizing initial pitching angular velocity prolongs the time for mission payloads to reach their maximum pitch angle, thus decreasing horizontal displacement and improving separation safety. Deploying AUVs at greater depths alleviates the influence of ocean currents, thereby reducing disturbances during payload separation.

Simulation and Analysis of Deceleration Segment of High-Altitude Long-Distance Gliding UUV

An Underactuated AUV Tracking Algorithm Based on Backstepping Adaptive Sliding Mode Control

Computational Fluid Dynamics Study of Autonomous Underwater Vehicle with Vectorial Thrusters

Research on Dynamic Landing Guidance Algorithm for the Maritime Quadrotor

Dynamic Modeling of a Wave Glider

Safety Analysis of Initial Separation Phase for AUV Deployment of Mission Payloads

Numerical simulation of postlaunching behaviors for a “balloon-borne UAV system”

A Virtual Online Simulator Design for the Docking of Unmanned Underwater Vehicle

Computational simulation of a submersible unmanned aerial vehicle impacting with water

Hydrodynamic Analysis and Drag-Reduction Design of an Unmanned Underwater Vehicle Based on Computational Fluid Dynamics

Virtual-reality-based Online Simulator Design with a Virtual Simulation System for the Docking of Unmanned Underwater Vehicle

Numerical Study on the Water Entry of a Freely Falling Unmanned Aerial-Underwater Vehicle

Research and Design of Semi-physical Motion Simulation Systemt of Buoyancy-driven Underwater Glider

Experimental-based Hydrodynamic Simulation of Submarine Glider for Wave Gliders

Configuration and hydrodynamic performance calculation of an underwater glider

Numerical research on the high-speed water entry trajectories of AUVs with asymmetric nose shapes

Numerical investigation of forces and acceleration for air-sea unmanned aerial vehicle in transition

Hydrodynamic characteristics and motion simulation of flying-wing dish-shaped autonomous underwater glider

Simulation research on water-entry impact force of an autonomous underwater helicopter

Performance and Stability Analysis for Zju Glider

Hydrodynamic Analysis of Payload Bay Berthing for Underwater Vehicles