A Study on the Stiffness of the End of the Suspended Master–slave Remote Control Manipulator
Jiang Junxia,Dong Qun,Li Yan,Zhong Xiaoou
DOI: https://doi.org/10.1007/s40430-022-03774-7
IF: 2.361
2022-01-01
Journal of the Brazilian Society of Mechanical Sciences and Engineering
Abstract:In the hot chamber of the nuclear industry, operators can only use master–slave remote control manipulators to perform various actions when fuel reprocessing is required to avoid danger. Compared with the master manipulator, the coordinate transformation matrix and the Jacobian matrix are established. The slave manipulator in the thermal chamber requires higher load and higher precision operation, but it has not been widely explored. In this paper, through the kinematic analysis of the manipulator, the coordinate transformation matrix and the Jacobian matrix of the suspended master–slave remote control manipulator are established, and the total stiffness model of the end of the manipulator is established according to the mapping of the two deflections of the end of the manipulator. Besides, the joint stiffness and arm link stiffness of the manipulator were solved separately. To demonstrate the applicability of the model, the corresponding simulation calculation is carried out. First, we use ANSYS to carry out finite element static analysis on different load conditions of the driven mechanism, and the end deflection values are solved by simulation and compared with the theoretically calculated values, the results are in good agreement, so the validity of the model is proved. Then, the experimental verification has been carried out through the suspended master–slave remote control manipulator test platform, and the results show the accuracy of the stiffness model and the finite element analysis results. This model provides a reference advice for the calculation of the stiffness of the end of the suspended master–slave remote control manipulator.