Abstract:PTFE adheres poorly to other materials due to its low surface energy and chemical inertness,which leads to failure of PTFE in many industrial applications.To spread the applications,numerous methods for surface modification have been developed to activate the PTFE surface for improving its wettability and adhesion ability.This study focused on the surface modification of expanded poly(tetrafluoroethylene)(ePTFE)film by a two-step process based on low-pressure plasma treatment followed by acrylic acid(AAc)graft copolymerization.The influences of different plasma treatments and graft copolymerization conditions on the hydrophilicity of film surface were studied.The wettability of the ePTFE film surface was determined by water contact angle,and the surface elemental compositions and the type of functional groups on the surface of the treated ePTFE samples were evaluated by X-ray photoelectron spectroscopy(XPS).The results indicated that the contact angle of ePTFE film declined from 145° to 102° when it was only treated by plasma treatment.After AAc grafted copolymerization,the contact angle decreased further to a smaller value.And the wettability of the film was improved obviously and kept constant.The condition of plasma treatment was He,100 W,90 s.The condition of AAc graft copolymerization was 30%(vol.),70℃,3 h.XPS analysis showed that the element ratio of F/C declined from 1.960 to 0.853,while the element ratio of O/C rose from 0 to 0.147.The result indicated that plasma treatment could greatly change the surface chemistry as well as morphology of ePTFE films.The surface roughness increased with plasma treatment time.From XPS measurements,it could be seen that the polar hydrophilic groups had been successfully grafted onto the ePTFE surface.The inert fluorine elements were partly replaced by oxygen polar groups,which was the fundamental reason for the improvement of hydrophilicity of ePTFE film.

Surface‐initiated Atom Transfer Radical Polymerization from Porous Poly(tetrafluoroethylene) Membranes Using the CF Groups As Initiators

Controlled Grafting of Comb Copolymer Brushes on Poly(tetrafluoroethylene) Films by Surface-Initiated Living Radical Polymerizations.

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Poly(Tefrafluoroethylene) Film Surface Functionalization With 2-Bromoisobutyryl Bromide As Initiator For Surface-Initiated Atom-Transfer Radical Polymerization

Poly(vinylidene Fluoride) with Grafted Poly(ethylene Glycol) Side Chains Via the RAFT-Mediated Process and Pore Size Control of the Copolymer Membranes

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Functional and Surface-Active Membranes from Poly(vinylidene Fluoride)-Graft-poly(acrylic Acid) Prepared Via RAFT-mediated Graft Copolymerization.

Surface Modification Of Poly (Tetrafluoroethylene) Function Materials By Plasma-Induced Graft Copolymerization Of Acrylic Acid

Surface Grafting Polymerization and Modification on Poly (tetrafluoroethylene) Films by Means of Ozone Treatment

Tethering Hydrophilic Polymer Brushes Onto PPESK Membranes Via Surface-Initiated Atom Transfer Radical Polymerization

Graft Polymerization of Acrylic Acid on A Polytetrafluoroethylene Panel by an Inductively Coupled Plasma

Studies on Surface Graft Polymerization of Acrylic Acid Onto PTFE Film by Remote Argon Plasma Initiation

Surface modification of low temperature plasma-pretreated ePTFE film by AAc graft copolymerization

HYDROPHILIC MODIFICATION OF PPESK POROUS MEMBRANES VIA AQUEOUS SURFACE-INITIATED ATOM TRANSFER RADICAL POLYMERIZATION

Surface Modification and Adhesion Improvement of Expanded Poly(tetrafluoroethylene) Films by Plasma Graft Polymerization

Graft Polymerization of 2-Hydroxyethyl Methacrylate Via ATRP with Poly(acrylonitrile-Co-p-chloromethyl Styrene) As a Macroinitiator

Construction of Comb-Like Poly(N-Isopropylacrylamide) Layers on Microporous Polypropylene Membrane by Surface-Initiated Atom Transfer Radical Polymerization

Surface Modification of Porous Polypropylene Membrane by Plasma-Initiated RAFT Graft Polymerization

Femtosecond laser texturing assisted cold plasma hydrophilization of polytetrafluoroethylene surface

Surface Modification of Porous Polypropylene Membrane by PlasmaInitiated RAFT Graft Polymerization of Hydroxyethyl Methacrylate