Abstract:In this paper, we propose a novel acquisition system, which can flexibly adjust the sampling rate according to different sampling requirements. First, we propose a sampling model and conduct feasibility verification experiments on it. The experimental results show that the sampling principle has excellent sampling function. Subsequently, we successfully implemented the system. The system combines the differential comparator of FPGA with the characteristics of TDC, which makes full use of the hardware resources of FPGA to realize efficient digital sampling and reconstruction of unknown signals. Among them, the TDC we designed has a time error of less than 100ps at sampling rates lower than 50MSps. the sampled signal is transmitted via Ethernet, and the measured on-chip data link throughput rate reaches 600 Mbps. the sampled information is decoded, fitted and reconstructed in the host computer. In addition, we have thoroughly studied the factors affecting the sampling quality in this acquisition method and summarized the sampling laws after acquiring multiple signals. To ensure the minimum distortion rate, we choose the threshold signal amplitude as 0-5 times of the highest amplitude of the sampled signal, and select the frequency as 10-30 times. Regarding the system resource consumption, the LUT utilization rate is 12.22%, the Slice utilization rate is 23.37%, and the overall design power consumption is 2.094 W. Finally, after a comprehensive evaluation of the performance of the system, the results show that the system has a small error, high precision, and high-speed dynamic sampling function. Synthesizing this paper, the system shows good engineering practicability and feasibility in the field of measurement.

Method and Implementation of High-speed Digital Sampling Technology Based on Impulse Radar Signal: Method and Implementation of High-speed Digital Sampling Technology Based on Impulse Radar Signal

FPGA Implementation of High-Speed Data Acquisition System for High-Resolution Millimeter Wave Radar.

Research on High-speed Detection Method of Radar Signal Based on RFSoC.

Design of a new internal synchronous ground penetrating radar receiver

Design of a new ultra-wideband digital sampling receiver for ground penetrating radar

DMA-based High-Speed Parallel Acquisition System of Digital Signals

Method of High Timing Resolution Pulse Synthesis Based on Virtual Sampling

Design and implementation of pulse compression based on DSPs embedded in FPGA

Implementation of Sub-Nyquist Sampling System Based on Compressed Sensing

Research on Applications of High-Speed Sampling Technology and Its Remote UWB Radar Signals Processing

Design And Fpga Implementation Of Digital Pulse Compression For Hf Chirp Radar Based On Modified Orthogonal Transformation

Design of high-speed data acquisition system for radar signal

Multichannel High-Speed Data Acquisition System Based on FPGA and USB 2.0

Dynamic Sample Rate Acquisition System Based on Time-to-digital Converter Technology

Application of Equivalent-Time Sampling Combined with Real-Time Sampling in UWB Through-Wall Imaging Radar

Application of Asynchronous FIFO Plus PLL in High Speed Radar Data Acquisition System

Broadband Digital Reception of Pulse Stepped-frequency Radars

High frequency signal acquisition and control system based on DSP+FPGA

Design and Realization of Pulse Compression Method of Radar System Based on Fpga

A TD-ADC for IR-UWB Radars with Equivalent Sampling Technology and 8-Gs/s Effective Sampling Rate

Design of High Scanning Rate for Array Impulse Ground Penetrating Radar