Abstract:Throughout the last decade, many assistive robots for people with disabilities have been developed; however, researchers have not fully utilized these robotic technologies to entirely create independent living conditions for people with disabilities, particularly in relation to activities of daily living (ADLs). An assistive system can help satisfy the demands of regular ADLs for people with disabilities. With an increasing shortage of caregivers and a growing number of individuals with impairments and the elderly, assistive robots can help meet future healthcare demands. One of the critical aspects of designing these assistive devices is to improve functional independence while providing an excellent human-machine interface. People with limited upper limb function due to stroke, spinal cord injury, cerebral palsy, amyotrophic lateral sclerosis, and other conditions find the controls of assistive devices such as power wheelchairs difficult to use. Thus, the objective of this research was to design a multimodal control method for robotic self-assistance that could assist individuals with disabilities in performing self-care tasks on a daily basis. In this research, a control framework for two interchangeable operating modes with a finger joystick and a chin joystick is developed where joysticks seamlessly control a wheelchair and a wheelchair-mounted robotic arm. Custom circuitry was developed to complete the control architecture. A user study was conducted to test the robotic system. Ten healthy individuals agreed to perform three tasks using both (chin and finger) joysticks for a total of six tasks with 10 repetitions each. The control method has been tested rigorously, maneuvering the robot at different velocities and under varying payload (1-3.5 lb) conditions. The absolute position accuracy was experimentally found to be approximately 5 mm. The round-trip delay we observed between the commands while controlling the xArm was 4 ms. Tests performed showed that the proposed control system allowed individuals to perform some ADLs such as picking up and placing items with a completion time of less than 1 min for each task and 100% success.

Design and Evaluation of Light Manipulator Mounted on Wheelchair

Design and Analysis of Folding Mechanism for Intelligent Wheelchair-Stretcher Robot

Control of a Wheelchair-Mounted 6DOF Assistive Robot With Chin and Finger Joysticks

Wheelchair Maneuvering with a Single-Spherical-Wheeled Balancing Mobile Manipulator

A modular manipulator system using rotary joints toward helping the elderly and the handicapped

Analysis, Design, and Experimental Research of a Novel Wheelchair-Stretcher Assistive Robot

Web-based Customization and Motion Simulation of the Omni-directional Wheelchair.

Development of a redundant anthropomorphic hydraulically actuated manipulator with a roll-pitch-yaw spherical wrist

Eye-gaze control of a wheelchair mounted 6DOF assistive robot for activities of daily living

Dynamics Analysis and Lightweight Design of Manipulator of Elderly Serve Robot

Design and Test of a Multifunctional Mobile Manipulator Control System on an Experimental Platform

Dynamics and Structural Analysis for Arm Equipped on Intelligent Wheelchair

Design and Evaluation of the Extended FBS Model Based Gaze-Control Power Wheelchair for Individuals Facing Manual Control Challenges

A Wearable Human–Machine Interactive Instrument for Controlling a Wheelchair Robotic Arm System

Wheelchair design with variable posture adjustment and obstacle-overcoming ability

Design and analysis of a haptic master manipulator for minimally invasive surgery

Cnn And Pca Based Visual System Of A Wheelchair Manipulator Robot For Automatic Drinking

Design & Analysis of the Mechanical System for a Spacial 4-DOF Series-parallel Hybrid Lower Limb Rehabilitation Robot

Study and Design of a Light-weight Multi-joint Discretely-actuated Manipulator

Usability Studies of an Egocentric Vision-Based Robotic Wheelchair

Design and Experiment of Multi-Modal Intelligent Elderly Assisted Wheelchair Robot