Abstract:Objective: In order to address the issues of inconvenience, high medical costs, and lack of universality associated with traditional knee rehabilitation equipment, a portable intelligent wheelchair for knee rehabilitation was designed in this study. Methods: Based on the analysis of the knee joint's structure and rehabilitation mechanisms, an electric pushrod-driven rehabilitation institution was developed. A multi-functional module was designed with a modular approach, and the control of the wheelchair body and each functional module was implemented using an STM32 single-chip microcomputer. A three-dimensional model was established using SolidWorks software. In conjunction with Adams and Ansys simulation software, kinematic and static analyses were conducted on the knee joint rehabilitation institution and its core components. A prototype was constructed to verify the equipment's actual performance. Results: According to the prototype testing, the actual range of motion for the knee joint swing rod is 15.1°~88.9°, the angular speed of the swing rod ranges from -7.9 to 8.1°/s, the angular acceleration of the swing rod varies from -4.2 to 1.6°/s², the thrust range of the electric pushrod is -82.6 to 153.1 N, and the maximum displacement of the load pedal is approximately 1.7 mm, with the leg support exhibiting a maximum deformation of about 1.5 mm. Conclusion: The intelligent knee joint rehabilitation wheelchair meets the designed functions and its actual performance aligns with the design criteria, thus validating the rationality and feasibility of the structural design.

Dynamics and Structural Analysis for Arm Equipped on Intelligent Wheelchair

Property Analysis and Structure Optimization of Robotic Arm Based on SolidWorks and ANSYS

Design and Analysis of Folding Mechanism for Intelligent Wheelchair-Stretcher Robot

Kinematics Simulation for a Power Wheelchair with Self-Actuated Seating Fnctions

Kinematics Analysis of Multifunctional Rehabilitation Aids about Lower Limbs Based on MATLAB

Mechanics analysis of a wheelchair robot with wheel-track coupling mechanism

Dynamic Modeling and Analysis for Robotic Arm-Hand Systems

Dynamic Analysis of Rehabilitative Arm Robot

Dynamics and Kinematics Analysis and Simulation of Lower Extremity Power-Assisted Exoskeleton

Analysis, Design, and Experimental Research of a Novel Wheelchair-Stretcher Assistive Robot

Kinematics Analysis of Multi-Functional 4-DOF Mechanical Arm

Structural Design And Performance Analysis For A Novel Wheel-Legged Rescue Robot

Design & Analysis of the Mechanical System for a Spacial 4-DOF Series-parallel Hybrid Lower Limb Rehabilitation Robot

Structure design and kinematic analysis of dual arm robot

Design and Simulation of Leg Exoskeleton Cycling-Actuated Wheelchair

[Structural Design and Analysis of Portable Intelligent Wheelchair for Knee Rehabilitation]

A Wheelchair Robot Design with Wheel-Track Coupling Mechanism and Motion Analysis

MECHANICAL STRUCTURE IMPROVEMENT OF AN UPPER LIMB REHABILITATION ROBOT: BASED ON AN EQUIVALENT KINEMATIC MODEL

Kinematics Model and Simulation for Motor of Four-link Electric Chair

Modeling and Simulation of a Wheelchair System with Motion Control

Design and control of a sit-to-stand assistive device based on analysis of kinematics and dynamics