A Wireless Headstage System Based on Neural-Recording Chip Featuring 315 Nw Kickback-Reduction SAR ADC
Yunshan Zhang,Changgui Yang,Junhong Sun,Zhuhao Li,Huan Gao,Yuxuan Luo,Kedi Xu,Gang Pan,Bo Zhao
DOI: https://doi.org/10.1109/tbcas.2022.3224387
2022-01-01
IEEE Transactions on Biomedical Circuits and Systems
Abstract:Wireless neural-recording instruments eliminate the bulky cables in multi-channel signal transmission, while the system size should be reduced to mitigate the impact on freely-moving animals. As the battery usually dominates the system size, the neural-recording chip should be low power to minimize the battery in long-termly monitoring. In general, a neural-recording chip consists of an analog front end (AFE) and an 8 bit $-$ 10 bit analog-to-digital converter (ADC), while it's challenging to design an ADC with an 8 $-$ 10 effective number of bits (ENOB) and sub- $\mu$ W power consumption due to the kickback noise. In this work, we propose a kickback-reduction technique for a successive-approximation-register (SAR) ADC based on neural-recording chip. Fabricated in 65 nm CMOS process, the proposed technique reduce the ADC power to 315 nW, resulting in an 8-channel neural-recording chip with 249 $\mu$ W in total. Measured results show that the chip achieves an ADC ENOB of 9.73 bits, as well as an AFE gain of 43.3 dB and input-referred noise (IRN) of 9.68 $\mu V_{rms}$ in a bandwidth of 0.9 Hz $-$ 7.2 kHz. Combined with a BLE chip and a PCB antenna, the chip is implemented into a 2.6 g wireless headstage system (w/o battery), and an in-vivo demonstration is conducted on a male Sprague-Dawley rat with Parkinson's disease. The headstage system transfers the in-vivo neural signals to a commodity smartphone through BLE, and the miniature size induces little impact on freely-moving activities.