Abstract:Highlights • Investigated the influence of bed shape on the fluidization characteristics of Geldart B particles. • The tapered bed exhibits a higher resistance to the particle flow, making it prone to flow segregation. • The circular bed exhibits the weakest sidewall effect and the have a better quality of particle fluidization. • In the tapered bed, the uneven particle flow results in the poorest separation efficiency of the feed particles. The technology of gas-solid dense-phase fluidized bed separation is applied in the separation of fine particles in minerals due to its stable and reliable characteristics. The experiment collected time-domain distribution signals of pressure drop from fluidized beds with different shapes, systematically analyzed the spatiotemporal distribution characteristics of bed density, and studied the effects of bed shape and fluidization number N on the fluidization and flow transition of the bed layer. The results indicate significant differences in U mf among fluidized beds with different shapes, and the tapered bed requires the highest energy for fluidization. When N =1.3, the cylindrical bed layer is the most stable, maintaining an average density of 1.8 g/cm 3 , with a density fluctuation variance of 0.02 g/cm 3 . Additionally, when N <1.0, almost no bubbles inside the bed layer. With an increase in gas velocity, the time-domain distribution of pressure drop signals shows different degrees of fluctuation. When N =1.1, Conspicuous non-uniform particle flow is evident in the tapered bed, with a bubble main frequency of 8 Hz, an amplitude of 27.1, and the highest pressure drop energy signal, indicating that the tapered bed enters the bubbling state prematurely. Finally, fine coal separation experiments were conducted, and the results showed that the minimum E value for the cylindrical bed is 0.08 g/cm 3 , while the maximum E value for the tapered bed is 0.17 g/cm 3 . Graphical abstract Download : Download high-res image (121KB) Download : Download full-size image

Fluidization of fine particles in conical beds

Fluidization of coarse particles in gas–solid conical beds

Fluidization of Coarse Powder in Tapered Beds

Experimental Investigation of Bubble and Particle Motion Behaviors in A Gas-Solid Fluidized Bed with Side Wall Liquid Spray

Characterization of Particle Fluidization Pattern in a Gas Solid Fluidized Bed Based on Acoustic Emission (AE) Measurement

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Distribution and Movement of Fine Particles Injected in a Gas–solid Fluidized Bed with Hydrocarbon Liquid Spray

Hydrodynamics of Deep Fluidized Bed of Geldart D Particles

CFD-DEM Simulation of High Density Particles Fluidization Behaviors in 3D Conical Spouted Beds

Effect of fluidized bed shapes on gas-solid fluidization characters and flow regime transition

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Investigation of flow behaviors in a fluidized bed reactor with binary mixture of Geldart-A and B particles

Numerical Study on Flow Behavior of Ultrafine Powders in Conical Spouted Bed with Coarse Particles

Homogeneous Fluidization of Geldart D Particles in a Gas–Solid Fluidized Bed with a Frame Impeller

Numerical Investigation of the Gas‐Solid Flow Characteristics in a Three‐Dimensional Spouted Bed with a Draft Tube

Bed expansion and fluidized states change of Geldart-B particle gas-solid fluidized bed

Study of Flow Characteristics of Ultrafine CaCO3 Powders in a Spouted Bed

Turbulent Fluidization and Transition Velocity of Geldart B Granules in a Spout–fluidized Bed Reactor

Experimental study on particles mixing in an annular spouted bed

Experimental study on flow characteristics of gas-solid of powdered coal in a fluidized-bed