Abstract:Stress corrosion cracking (SCC) is a major problem in the welded components of austenitic stainless steel in nuclear power plants. High tensile residual stress is an important factor resulting in the SCC of materials. Austenitic stainless steel has a strong tendency for work hardening owing to its fcc crystal structure and low stacking-fault energy. High plastic strain can accumulate during a multipass welding process. On the other hand, accumulated strain hardening can be reduced or even eliminated during the welding thermal cycles owing to dynamic recovery, recrystallization, and grain growth below the melting point, which is called the annealing effect. Influence of strain hardening and annealing effect needs to be investigated to predict the welding-induced residual stresses accurately in austenitic stainless steel joints. In this study, a new time-temperature-dependent annealing model was proposed based on the Johnson-Mehl-Avrami equation. Numerical Satoh tests were performed to clarify the influence of strain-hardening models (i.e., the isotropic strain-hardening model and Chaboche mixed isotropickinematic strain-hardening model) and annealing models (i. e., the single-stage annealing model and new time-temperature-dependent annealing model) on the formation of residual stresses and the accumulated plastic strain during multiple thermal cycles. Thermoelastic-plastic finite element (FE) analyses were carried out to predict the welding residual stresses and accumulated plastic strain in a thick-wall 316 stainless steel butt-welded pipe joint with 85 welding passes. The residual stresses of the welded joint were measured by the sectioning method, inherent strain method, and deep-hole drilling method. The simulations of welding residual stresses were compared with the measurements. Annealing effect significantly influences the formation of accumulated plastic strain and welding residual stresses, neglecting which will result in a significant overestimation of FE results. The proposed annealing model showed an excellent match to the experimental data. With the consideration of the annealing effect, the isotropic strain-hardening model overestimated the welding residual stresses slightly, while the FE results of welding residual stresses using the Chaboche mixed strain-hardening model showed better agreement with the measurements. The single-stage annealing model revealed a recommended annealing temperature of 900-1000 degrees C for austenitic stainless steel such as 316 stainless steel.

Prediction of Welding Residual Stress in Multi-Pass Butt-Welded Modified 9cr–1mo Steel Pipe Considering Phase Transformation Effects

Finite Element Analysis of Temperature Field, Microstructure and Residual Stress in Multi-Pass Butt-Welded 2.25cr–1mo Steel Pipes

Numerical Investigation on Welding Residual Stress in 2.25Cr-1Mo Steel Pipes

Prediction of the Residual Welding Stress in 2.25Cr-1Mo Steel by Taking into Account the Effect of the Solid-State Phase Transformations

Predicting Welding Residual Stress of a Multi-pass P92 Steel Butt-Welded Joint with Consideration of Phase Transformation and Tempering Effect

Influence of Transformation Induced Plasticity on Simulated Results of Welding Residual Stress in Low Temperature Transformation Steel

FEM Prediction of Welding Residual Stress and Distortion in Carbon Steel Considering Phase Transformation Effects

Finite Element Analysis of Residual Stress in 2.25Cr-1Mo Steel Pipe During Welding and Heat Treatment Process

Investigation of Residual Stress in Butt-Welded Plates Considering Phase Transformation

Solid phase transformation effects on stress and strain in the thick plate EH40 welded butt joint

Influence of Material Model on Prediction Accuracy of Welding Residual Stress in an Austenitic Stainless Steel Multi-pass Butt-Welded Joint

Strength Mismatch Effect on Residual Stress of High Strength Steel Butt-Welded Joints

Thermal-mechano-metallurgical coupled analysis of welding residual stress

Numerical and Experimental Analysis of Dissimilar Repair Welding Residual Stress in P91 Steel Considering Solid-State Phase Transformation

Numerical Simulation of Residual Stress and Deformation Considering Phase Transformation Effect

Accurate Prediction of Welding Stress Evolution by Considering Improved Phase Transformation Model

Numerical and experimental study on thermal-metallurgical-mechanical behavior of high-strength steel welded joint

Prediction of Residual Stress Distributions in Welded Sections of P92 Pipes with Small Diameter and Thick Wall Based on 3D Finite Element Simulation

Predicting Welding Residual Stress Distributions In P92 Steel Joints Considering The Influence Of Solid-State Phase Transformation

Influence of Strain Hardening and Annealing Effect on the Prediction of Welding Residual Stresses in a Thick-Wall 316 Stainless Steel Butt-Welded Pipe Joint

Numerical and Experimental Investigations on Welding Residual Stress in Multi-Pass Butt-Welded Austenitic Stainless Steel Pipe