Abstract:Silicon-based materials have become one of the most likely materials to replace graphite anodes of Li-ion batteries due to their ultra-high theoretical specific capacity, safe lithium intercalation potential, and abundant reserves. However, the large volume effect of silicon-based materials during cycling has become a serious obstacle to their commercial application. Silicon-metal composite is one of the potential solutions to alleviate the volume effect of silicon-based anode. Traditional electrodes are prepared by slurry coating method, and the electrodes crack and fall off after many cycles, resulting in capacity loss. In this paper, a cold spraying method combined with ball milling was proposed to prepare silicon-copper composite electrodes to improve the bonding between electrode materials and the cycling stability of the electrodes. Composite powders with different component ratios were first prepared. Then, the micromorphology, bond strength, thermal conductivity, and electrochemical performance of the electrodes prepared by the slurry coating method and the cold spray method were analyzed, respectively. The results show that the Cu 100- x Si x cold sprayed electrodes have higher bond strength and porosity, while the higher porosity of the cold-sprayed electrodes does not promote heat transfer. After the addition of conductive carbon black, the electrodes exhibit better structural stability, cycling performance, capacity retention, and reaction kinetics, with the Cu 80 Si 20 + SP cold prayed electrode exhibiting 600 mAh g −1 after 200 cycles. This work not only successfully prepared a silicon-copper composite anode with excellent performance but also provided a reference for the preparation of other composite electrodes by cold spray combined with ball milling.

Study on Silicon-Based Composite Anode Material for Li-ion Battery

Silicon-Based Materials As High Capacity Anodes for Next Generation Lithium Ion Batteries

High-performance SiO/C Composite Anode Material for Lithium Ion Battery

Preparation and Study on Si/Ag/C Composite As Anode Material for Lithium Ion Batteries

High Performance Amorphous-Si@siox/c Composite Anode Materials for Li-ion Batteries Derived from Ball-Milling and in Situ Carbonization

Facile preparation of silicon/carbon composite with porous architecture for advanced lithium-ion battery anode

Analysis of research progress in improving the performance of silicon-based anode materials for lithium-ion batteries: a combination of nanostructured silicon and silicon-based composites

Effect of Graphite Matrix on Property of Silicon/Carbon Composite Anode Material for Lithium-Ion Battery

High capacity silicon/carbon composite anode materials for lithium ion batteries

Yolk-shell silicon/carbon composites prepared from aluminum-silicon alloy as anode materials for lithium-ion batteries

Preparation of Sn-Si-C Composite As Li-ion Battery Anode Material by High Energy Ball Milling and Its Properties

Study of Porous Si/C Composite Anode for Lithium Ion Batteries

Preparation of Si-Based Composite Anode for Li-Ion Batteries by Cold Spraying and Its Electrochemical Performance

Synthesis and Electrochemical Characteristics of Silicon/Carbon Anode Composite with Binders and Additives

Synthesis of nanosized Si composite anode material for Li-ion batteries

Yolk-shell structured silicon/carbonized polyacrylonitrile composites as anode materials for lithium-ion batteries

A high-performance silicon/carbon composite as anode material for lithium ion batteries

The silicon-based anode in lithium-ion battery

Binary Carbon Modification Promoting the Electrochemical Performance of Silicon Anode for Lithium‐Ion Batteries

Porous Silicon–graphene–carbon Composite As High Performance Anode Material for Lithium Ion Batteries

Gelatin and sodium alginate derived carbon/silicon composites as high-performance anode materials for lithium-ion batteries