Abstract:In high temperature conditions, this can cause considerable changes in the mechanical properties of the composite. In order to determine the structural and mechanical property changes that occur in composite materials at elevated temperatures, to elucidate the damage mechanisms at elevated temperatures, and to improve the stability and durability of the materials. This paper studies how plasma treatment time affects the surface polarity, roughness, wettability and mechanical properties of carbon fibers. The results showed that the best wettability was attained after 10 min of plasma treatment, and new oxygen-containing functional groups (COO- and -C=O) developed on the fiber surface. The fundamental explanation is that during plasma surface treatment, the CH group in the bisphenol A part chain segment present in the epoxy resin sizing agent's composition is oxidized, forming an organic oxide layer. In this paper, the plasma modification technology was utilized to improve the interfacial compatibility of carbon fiber and Polyimide (PI) resin, and the interlaminar shear strength reached 103.98 MPa, up 10.49 %, and the strength retention rate was 84.3 % at 300 °C. In this paper, the plasma modification technique was employed to increase the interfacial compatibility of carbon fiber and PI resin. It was found that the Inductively Coupled Plasma (ICP) treated carbon fiber surfaces underwent physical and chemical changes that effectively enhanced the interfacial compatibility with the resin. However, the chemical groups and physically etched regions on the surface of the plasma-modified fibers are able to impede the relative motion of the resin to a certain extent, thus improving the interfacial strength.

The uniform treatment of carbon fiber surface in three-directional orthogonal fabric by oxygen-plasma

Research on Surface Treatment of Carbon Fiber and the Conductive Properties of Paper

Uniform Modification of Carbon Fibers Surface in 3-D Fabrics Using Intermittent Electrochemical Treatment

Evaluation of Interfacial Properties of Atmospheric Pressure Plasma-Treated Cnt-Phenolic Composites by Dual Matrix Fragmentation and Acoustic Emission Tests

Effects of Anodic Oxidation Treatment for Three Dimensional Carbon Fibre Braided Fabric on Properties of Its Composite

Surface modification by air-plasma treatment and its effect on the tribological behavior of hybrid fabric-polyphenylene sulfide composites

Effect Of Air Plasma Treatment On Interfacial Shear Strength Of Carbon Fiber-Reinforced Polyphenylene Sulfide

Plasma Activation of Carbon Fibres for Polyarylacetylene Composites

AIR COLD PLASMA MODIFICATION ON PBO FIBER SURFACE

Effects of Oxygen Plasma Treatment on the Physical and Chemical Properties of Wool Fiber Surface

Effects of argon plasma treatment on carbon fiber surface characteric and its reinforcing polyimide composites interfacial properties at room and elevated temperatures

Surface modification of polyimide fibers for high-performance composite by using oxygen plasma and silane coupling agent treatment

The Influence of Plasma Surface Treatment of Carbon Fibers on the Interfacial Adhesion Properties of UHMWPE Composite

Impact of plasma-modified pretreatment on the tensile properties of carbon fiber-reinforced epoxy composites

Carbon Fiber Surface Modification by Plasma Treatment for Interface Adhesion Improvements of Aerospace Composites

Effects of Fibre Surface Treatment on Interfacial Properties of CF/PAA Composites

Effect of the Atmospheric Plasma Treatment Parameters on the Surface and Mechanical Properties of Carbon Fabric

Development of Universal Fabric Dyeing and Adhesion Through RF Glow Discharge Plasma Treatment

Influence of Fibre Surface Oxidation Treatment on Mechanical Interfacial Properties of Carbon Fibre/ Polyarylacetylene Composites

High Efficient and Continuous Surface Modification of Carbon Fibers with Improved Tensile Strength and Interfacial Adhesion

STUDY ON THE HOMOGENEITY OF CARBON FIBERS' SURFACE MODIFICATION IN 3-D FABRICS