Abstract:Abstract In order to solve the problem that a traditional articulated arm coordinate measuring machine (AACMM) cannot measure automatically, a self-driven AACMM is proposed. Based on the self-driven AACMM design indicators, the length of the connecting rods of the self-driven AACMM was allocated. The self-driven AACMM virtual prototype was designed and assembled based on joint module selection and joint component design, and its measurement space range was also verified. The key components of the structural optimized design and dynamic performance analysis of motion parameters are adopted, respectively, to correct the positioning error of the self-driven AACMM’s probe caused by static and dynamic deformations. The static deformation of the structure caused by the self-driven AACMM’s weight was analyzed. The influence of the dynamic flexible deformation on the positioning error of the probe of the self-driven AACMM during the variable-speed approach and the constant-speed touch measurement stage was studied. The results show that the measurement space range of the self-driven AACMM designed in this paper can meet the design index of the measuring radius. The probe position error caused by static deformation of the measuring machine after structural optimization is reduced by an order of magnitude, and the equivalent stress of the mechanical structure of the self-driven AACMM is within the allowable stress of the material. The positioning error of the probe caused by the dynamic deformation of the self-driven AACMM structure meets the positioning accuracy index. During the stage of self-driven AACMM constant-speed touch measurement, the instantaneous position error of the probe changes linearly with the touch time and the optimal touch speed (6.6 mm s −1 , 6.4 mm s −1 ) exists to minimize the probe positioning error. During the variable-speed approach stage, the influence of the angular acceleration and the angular velocity of each joint on the positioning error of the probe is negligible when the self-driven AACMM is in the typical posture. In the extreme posture, with the optimal joint angular acceleration ( 0.00055 ∘ s − 2 ) and angular velocity ( 0.0185 ∘ s − 1 ), the inertial force of the measuring machine structure and the instantaneous position error of the probe are the smallest, and the movement stability is the best. The structural optimization design and motion parameter performance analyses of the self-driven AACMM can provide a theoretical research foundation for subsequent motion parameter optimization and dynamic error compensation modeling.

Design and Optimization for Analog Measuring Equipment of Electroacoustic Imaging

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

Noise Analysis and Parameter Optimization of Digital MEMS Accelerometer System

Modeling and Simulating of Optimization-Design for Structure Parameters of Ccd Intersection Measurement System

Design and optimization of a new type of contactless radial C4D sensor

The Research on Sensor Optimal Layout on Detection Device for Automobile Seat Horizontal Drive Mechanism

In situ monitoring of FDM machine condition via acoustic emission

Research and Application on Optic-electronic Ranging Technology for Close Quarters

Design of Optimal Fast Scanning Trajectory for the Mechanical Scanner of Measurement Instruments

Design and Development of the Transmitter of No-Dig Navigating Instrument

Modeling and Optimal Design of the Rotary-Linear Type Two-Degree-of-Freedom Ultrasonic Motors

Research on Transmission Performance of a Surface Acoustic Wave Sensing System Used in Manufacturing Environment Monitoring

A novel acoustic emission sensor design and modeling method for monitoring the status of high-speed train bearings

Exploration of Vibration Signal Measurement Method of Automobile Parts Utilizing FPGA/Photoelectric Sensor

Measurement and Evaluation Method of Distributed Optical Fiber Acoustic Sensing Performance

Measurement And Analysis Of Vibration And Noise Signals Of Rotating Machines By Non-Invasive Method

Measurement insights and error analysis of electronic parameters for ultrasonic transducers

Design of Non-contact Automatic Measurement System

Structural design and performance analysis of a self-driven articulated arm coordinate measuring machine

Topology Optimization Design Method for Acoustic Imaging Array of Power Equipment

Design and Application of a High Precision Intelligent Distance Measuring Device