Abstract:The anode electrode is one of the most important components in all microbial electrochemical technologies (METs). Anode materials pretreatment and modification have been shown to be an effective method of improving anode performance. According to mass loss analysis during carbon fiber heating, five temperatures (300, 450, 500, 600, and 750 °C) were selected as the pre-heating temperatures of carbon fiber brush anodes. Microbial fuel cell (MFC) reactors built up with these pre-heated carbon brush anodes performed with different power densities and Coulombic efficiencies (CEs). Two kinds of measuring methods for power density were applied, and the numerical values of maximum power densities diverged greatly. Reactors with 450 °C anodes, using both methods, had the highest power densities, and the highest CEs were found using 500 °C anode reactors. The surface elements of heat-treated carbon fibers were analyzed using X-ray photoelectron spectra (XPS), and C, O, and N were the main constituents of the carbon fiber. There were four forms of N1s at the surface of the polyacrylonitrile (PAN)-based carbon fiber, and their concentrations were different at different temperature samples. The microbial community of the anode surface was analyzed, and microbial species on anodes from every sample were similar. The differences in anode performance may be caused by mass loss and by the surface elements. For carbon brush anodes used in MFCs or other BESs, 450–500 °C preheating was the most suitable temperature range in terms of the power densities and CEs.

Treatment of carbon fiber brush anodes for improving power generation in air–cathode microbial fuel cells

Comparison of Different Chemical Treatments of Brush and Flat Carbon Electrodes to Improve Performance of Microbial Fuel Cells

Graphite Fiber Brush Anodes For Increased Power Production In Air-Cathode Microbial Fuel Cells

Treatment of carbon cloth anodes for improving power generation in a dual-chamber microbial fuel cell

Ammonia Treatment of Carbon Cloth Anodes to Enhance Power Generation of Microbial Fuel Cells

Analysis of Anodes of Microbial Fuel Cells when Carbon Brushes Are Preheated at Different Temperatures

Use of Carbon Mesh Anodes and the Effect of Different Pretreatment Methods on Power Production in Microbial Fuel Cells.

Combined Carbon Mesh and Small Graphite Fiber Brush Anodes to Enhance and Stabilize Power Generation in Microbial Fuel Cells Treating Domestic Wastewater

Alkaline Treatment of Used Carbon-Brush Anodes for Restoring Power Generation of Microbial Fuel Cells

Enhanced Electricity Generation for Microbial Fuel Cell by Using Electrochemical Oxidation to Modify Carbon Cloth Anode

Performance Improvement of MFCs by Treatment of Carbon Cloth Anode with Ultrasonic or Spent Anolyte

Improved Performance of Membrane Free Single-Chamber Air-Cathode Microbial Fuel Cells with Nitric Acid and Ethylenediamine Surface Modified Activated Carbon Fiber Felt Anodes.

Carbon Material Optimized Biocathode for Improving Microbial Fuel Cell Performance

Power Generation and Electrochemical Analysis of Biocathode Microbial Fuel Cell Using Graphite Fibre Brush As Cathode Material

Increased Performance of Microbial Fuel Cells Using Granular Activated Carbon Anodes

Anode Modification with Formic Acid: A Simple and Effective Method to Improve the Power Generation of Microbial Fuel Cells

Performance of Two Different Types of Anodes in Membrane Electrode Assembly Microbial Fuel Cells for Power Generation from Domestic Wastewater

The Influence and Mechanism of Different Acid Treatment to Activated Carbon Used As Air-Breathing Cathode Catalyst of Microbial Fuel Cell

Effects of Anode Materials on Electricity Generation and Organic Wastewater Treatment of 6 L Microbial Fuel Cells

Coupling of Anodic and Cathodic Modification for Increased Power Generation in Microbial Fuel Cells

Electrochemical Treatment of Graphite to Enhance Electron Transfer from Bacteria to Electrodes.