Abstract:A microstrip bandpass filter with enhanced stopband rejection was designed based on the temporal coupled-mode theory in order to realize the signal isolation between transmitter and receiver (TR)channels in radio frequency (RF) transceiver systems.The filter consisted of two microstrip resonators,one supports an odd and an even mode,and the other supported an even mode.These three resonant modes coupled with each other,producing a transmission zero at low frequency below the passband,and two transmission zeros at high frequency above the passband.High frequency selection,passband flatness,and good stopband rejection above the passband were achieved.A C-band triple-mode microstrip bandpass filter was taken as an example.The characteristics of the filter with enhanced high-frequency stopband rejection can be accurately calculated by using temporal coupled-mode theory,and the coupling relationship among the three resonant modes can be obtained.The filter structure which satisfies the coupling relationship can be finished by using electromagnetic eigenmode simulation.The proposed filter was fabricated and tested.The test results matched the theoretical prediction well.Results show that the filter can be effectively applied in the isolation between TR channels in RF transceiver systems.The temporal coupled-mode theory can highly improve the design efficiency of filters with multi-mode coupling,which can achieve the required filter response of the system with high speed.

ADS-based Optimized Design of Parallel Coupled Microstrip Line Band-pass Filter

Design of microstrip bandpass filter with enhanced stopband rejection based on coupled-mode theory

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Design of X-band Hi-Lo Microstrip Low-pass Filters

A Flat-Passband Microstrip Filter With Nonuniform- $Q$ Dual-Mode Resonators

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

Design of multilayer triangular substrate integrated waveguide filter in LTCC

The Simulation of Microstrip Band Pass Filters Based on ADS

Dual-band bandpass filter using centrally coupled resonators (CCRs)

A Design Method of Multimode Multiband Bandpass Filters

Synthesis Design of High Selectivity Wideband Balanced Bandpass Filter Based on Parallel Coupled Lines

Design of novel multiband bandpass filters based on coupled symmetric short‐circuit stub multimode resonators

Microstrip Spiral-Coupled Scheme Bandpass Filters with Mutual Electric and Magnetic Coupling

A microstrip bandpass filter using coupled lines loaded by open stubs

Novel Microstrip Bandpass Filter Based On Defected Ground Structure And Slotline Coupling Techniques