Abstract:An air-separation unit (ASU) uses atmospheric air to produce essential pure gaseous and liquid products for many industrial sectors but requires intensive power consumption. In recent years, cryogenic liquid turbine expanders have been used to replace the traditional J-T valves in air-separation units to save energy. In this paper, an effective design optimization method is proposed to suppress swirling flow and mitigate cavitation in liquid turbines. A flexible tuning of the impeller and fairing cone geometries is simultaneously realized, where the optimization variables are identified via a geometric sensitivity study. A novel objective function is deliberately established by allowing both swirling flow and cavitation characteristics, driving the optimizer to search for deswirling and cavitation-resistant geometries. A kriging surrogate model with an adaptive sampling strategy and a cooperative co-evolution algorithm (CCEA) are incorporated to solve the highly nonlinear optimization problem, where the former reduced the costly evaluations but simultaneously maintained the model prediction accuracy and enabled the aim-oriented global searching (the latter decomposes the problem into several readily solved sub-problems that could be solved in parallel at a high-convergence rate). The optimized impeller and fairing cone geometries were quite favorable for suppressing swirling flow and mitigating cavitation. The impeller cavitation was significantly reduced, with the maximal vapor volume fraction reduced from 0.365 to 0.17 at the blade surface; the diffuser tube high-swirl flow was significantly deswirled and the intensive vapor fraction around the centerline largely reduced, with the maximal vapor volume fraction in the diffuser tube reduced from 0.387 to 0.121. As a result, the isentropic efficiency of the liquid turbine expander was improved from 88.4% to 91.43%.

Simulation and Optimization of Cryogenic Air Separation Units Using a Homotopy-Based Backtracking Method

Performance Design of a Cryogenic Air Separation Unit for Variable Working Conditions Using the Lumped Parameter Model

Feature Analysis and Simulation Method of Thermo-Coupled Air Separation Unit with Load Change Operation

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Automatic Load Change System of Cryogenic Air Separation Process

Modeling, Characteristic Analysis and Optimization of an Improved Heat‐Integrated Air Separation Column

Sensitivity Embedded Homotopy-Based Backtracking Method for Chemical Process Simulation

Optimal Design of Hybrid Cryogenic Flash and Membrane System

Homotopy Based Backtracking Method for Large-scale Process Simulations with Load Variation

Homotopy With Second-Order Correction Based Backtracking Method For Chemical Process Simulation

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Complete Equation-Oriented Approach for Process Analysis and Optimization of A Cryogenic Air Separation Unit

Multi-objective optimization of precooled JT cryocooler working at liquid hydrogen temperature

Modeling, simulation, and optimization of multi‐product cryogenic air separation unit startup

Dynamic Optimization of Multiproduct Cryogenic Air Separation Unit Startup

Dynamic Load Change Operation Education in Air Separation Processes Using a Multivariable and Nonlinear Model

Convergence Depth Control for Process System Optimization

Dynamic simulation and optimization of load change operation of high-temperature gas-cooled reactor pebble-bed module

Multi-objective Thermo-Economic Optimization of Collins Cycle

Cryogenic Cavitation Mitigation in a Liquid Turbine Expander of an Air-Separation Unit through Collaborative Fine-Tuned Optimization of Impeller and Fairing Cone Geometries

Simulation and Optimization of Ion Transfer Membrane Air Separation Unit in an IGCC Power Plant