Abstract:Abstract The permanent implantation of stents with and without carrying drugs led to the unresolvable long-term complications such as restenosis and thrombosis. There are increasing interests in bioresorbable stents, which have the potential to resume the vessel tone and mitigate complications. The bioresorbable stent served as a temporary scaffold for an expected period of 6 to 12 months. The design of both polymeric material and stent structure is acknowledged to impact the mechanical integrity of bioresorbable stent. Poly-l-lactide (PLLA), a polymer-based material, is the most adopted bioresorbable stent materials due to its sufficient strength and degradation resistance. The mechanical performances of the PLLA stents need to be evaluated before it is considered to serve in the clinical application. Because of difficulty and time-consuming of physical tests, finite element method (FEM) has become an efficient way to solve the problem. However, the mechanical performances of PLLA stents during the degradation process could not be fully captured using the existing numerical models. A strain-based degradation numerical model with consideration of stent-artery interaction was proposed based on the previous published experimental data. In this model, the elongation fracture of the PLLA material was correlated to the degradation degree, a scalar factor controlled by the time and local strain. The degradation evolution process was then fully captured after the stent implantation using the derived material model. With continuously loss of mass in material, the degradation rates were not uniform in different locations along the stent structure. Severe degradation was observed at the higher strain regions of the stent, which locates at the outer surface of the stent, near the crowns of the ring stent strut. At first stage of degradation, the stent strut thinning was observed in the model which was also found in the previous experimental study. At second stage of degradation, the degradation happened at the connection region between the link strut and ring struts which resulted in the break of mechanical integrity. The diameter of the vessel has minor change during the first stage of the degradation process, while at the second stage, with the breakdown of the ring structure, the vessel recoiled to its original diameter in one month time. The two-staged degradation process showed a vision for the ideal stent design. The developed computational model provided more insights into the degradation process, which could complement the discrete experimental data for improving the design and clinical management of the bioresorbable vascular scaffold.

Analysis of Degradation Data of Poly(l-Lactide–co-l,d-lactide) and Poly(l-Lactide) Obtained at Elevated and Physiological Temperatures Using Mathematical Models

Modeling the Effect of Physical Aging on the Stress Response of Amorphous Polymers Based on a Two-Temperature Continuum Theory

Degradation Modeling of Biodegradable Medical Polymer

An integrated mechanical degradation model to explore mechanical response of a bioresorbable polymeric scaffold

Polymer chain scission, oligomer production and diffusion: a two-scale model for degradation of bioresorbable polyesters.

Modeling Degradation Behavior of Biodegradable Polymers for Medical Devices: A Comparative Review of Phenomenological and Stochastic Approaches

An Entropy Spring Model for the Young’s Modulus Change of Biodegradable Polymers During Biodegradation

Short Poly(ethylene Glycol) Block Initiation of Poly(l‐lactide) Di‐block Copolymers: a Strategy for Tuning the Degradation of Resorbable Devices

Mechanical Performance of 3D Printed Polylactide During Degradation

Strain-Based Degradation Model With Application to Poly-L-Lactide Acid (PLLA) Artery Stent

Hydro-Thermal Degradation: A New and Rapid Method for Evaluating the Bio-degradation Performance of Poly(lactic acid)

DEGRADATION STUDY OF POLY(LACTIC ACID) POROUS SCAFFOLD AT DIFFERENT TEMPERATURES

A Mechanical Model for Stress Relaxation of Polylactic Acid/Thermoplastic Polyurethane Blends

The effect of chemical composition on the degradation kinetics of high molecular weight poly(trimethylene carbonate-co-L-lactide)

Degradation Modeling of Poly-L-lactide Acid (PLLA) Bioresorbable Vascular Scaffold Within a Coronary Artery

Monte Carlo simulation of poly(lactic-glycolic acid) films degradated in simulated body fluid

In Vitro Degradation Behavior of L-Lactide/Trimethylene Carbonate/Glycolide Terpolymers and A Composite with Poly(L-Lactide-Co-Glycolide) Fibers

Degradation of 3D-Printed Porous Polylactic Acid Scaffolds Under Mechanical Stimulus

Influence of Dynamic Compressive Loading on the in Vitro Degradation Behavior of Pure PLA and Mg/PLA Composite.

Modeling Strategies for the Degradation Behavior of Porous Polyester Materials Based on Their Key Structural Features

Effect Of Poly(L-Lactic Acid) On Hydrolytic Degradation Of Poly(Glycolic Acid)