Abstract:Polyamide/polypropylene (PA1010/PP) blends were prepared by melt mixing using maleic anhydride-grafted ethylene-octene copolymer (POE-g-PMAH) as a reactive compatibilizer. The compatibilizing effects of POE-g-PMAH on PA1010/PP blends were investigated by means of scaning electron microscopy (SEM), mechanical testing, Fourier transform infrared spectroscopy (FTIR) and differential scaning calorimetry (DSC), respectively. It was found that the addition of POE-g-PMAH could decrease the size of the dispersed PP particles, when the mass ratio of PA1010/PP/P0E-g-PMAH = 70/30/15, the domains showed a fine and uniform dispersion in the matrix. FTIR results showed that the anhydride carbonyl groups of POE-g-PMAH reacted with the end groups of PA1010 in the blending process. DSC results showed that addition of POE-g-PMAH decreased the crystallization temperature and crystallinity of PA1010 and PP in the blends, indicating that POE-g-PMAH had an inhibition effect on the crystallization of PA1010 and PP. Mechanical testing indicated that with increasing the POE-g-PMAH content, the Izod impact strength of dried samples increased gradually, when the content of POE-g-PMAH was 15%, the Izod impact strength of dried samples was 21. 13 kJ/m2, which is 3. 1 times that for the binary PA1010/PP blend. Meanwhile, the flexural strength, tensile strength and modulus can be maintained at a relatively high level. The compatibilization mechanism of POE-g-PMAH lied in the chemical interactions occuring between the terminal amino groups of PA1010 and anhydride of MAH in POE-g-PMAH during the melt mixing, and the compatibility between PP and ethylene-octene of POE in POE-g-PMAH. Hense the addition of POE-g-PMAH decreased the interfacial tension and the domain size dramatically, improved the mechanical properties greatly.

Properties of POSS‐filled Polypropylene: Comparison of Physical Blending and Reactive Blending

Preparation and properties of POSS grafted polypropylene by reactive blending

Rheological behavior of polypropylene/octavinyl polyhedral oligomeric silsesquioxane composites Part B Polymer physics

Rheological behavior of polypropylene/octavinyl polyhedral oligomeric silsesquioxane composites

The Effects of Structure of Poss on the Properties of Poss/Pmma Hybrid Materials

Isothermal crystallization kinetics of polypropylene/POSS composites

Nonisothermal crystallization kinetics of polypropylene/octavinyl polyhedral oligomeric silsesquioxane composites

Crystallization and Rheological Behavior of Poss Filled Polypropylene

Effect of POSS on Morphology and Properties of Poly(2,6-Dimethyl-1,4-phenylene Oxide)/polyamide 6 Blends

Properties of PA1010/PP blends modified by reactive compatibilization with POE-g-PMAH

Mechanical Properties and Morphology of Polypropylene/Poly(ethylene-co-octene) Blends

Influences of Dicumyl Peroxide on Morphology and Mechanical Properties of Polypropylene/poly(styrene‐b‐butadiene‐b‐styrene) Blends Via Vane‐extruder

Polypropylene Blends with Durable Hydrophobicity and Enhanced Mechanical Properties Based on POSS and Alkane Modified Polypentafluorophenyl Methacrylate

Morphology and properties of PP/PA 6 blends modified by reactive compatibilization

Studies on Thermal and Combustion Properties of Thermoplastic Vulcanizates Composites Modified by Polyhedral Oligomeric Silsesquioxane

Phenolic resin/polyhedral oligomeric silsesquioxane (POSS) composites: Mechanical, ablative, thermal, and flame retardant properties

Enhanced Properties Of Biodegradable Poly(Propylene Carbonate)/Polyvinyl Formal Blends By Melting Compounding

Synthesis and combustion property of polypropylene/IFR/ZRP nanocomposites

Influence of Reactive Compatibilization on the Morphology of Polypropylene/polystyrene Blends

Polyhedral oligomeric silsesquioxane (POSS)-Modified thermoplastic and thermosetting nanocomposites: A review

A Study of the Novel Intumescent Flame‐retarded PP/EPDM Copolymer Blends