Abstract:In this study, poly(methyl methacrylate) with different doping nano-cadmium sulfide (CdS/PMMA) is prepared and characterized. CdS/PMMA polymeric nanocomposite films were synthesized using solution casting methodology. SEM and XRD are used for structure analysis for the studied nanocomposite films. XRD revealed the amorphous domains of PMMA polymer, which increased with increasing CdS nanoparticle contents. SEM revealed the CdS dispersion within the PMMA matrix. CdS nanoparticles in the PMMA matrix are expected to be aggregated due to the casting technique. The optical energy gap is found to be decreased after the CdS addition. ε' and ε″ have the same behavior with the applied frequency. Maxwell-Wagner interfacial polarization is the responsible factor for higher values of ε'-ε″ at the higher frequencies. Electrical conductivity behavior σAC tends to obtain a constant value at lower frequencies that approach from its DC conductivity values. After doping PMMA with nano-CdS, an exponential increase after a critical frequency value and the values of σAC was also increased. Besides, a significant reduction in laser energy power is identified by the reduction of the output power. CdS/PMMA can attenuate the laser power due to its nonlinear effect. CdS/PMMA nanocomposite can act as a photocatalyst to improve the performance of the photodegradation of Rhodamine B (RhB). Among the different CdS/PMMA nanocomposite films, 3.33 wt% CdS/PMMA demonstrates the highest efficiency in visible photocatalysis of Rhodamine B. CdS/PMMA can be utilized as multifunctional materials use like laser optical limiting to reduce the power of laser sources and as a photocatalyst membranes.

Controllable Synthesis of Functionalized CdS Nanocrystals and CdS/PMMA Nanocomposite Hybrids

Synthesis of nanocrystal-polymer transparent hybrids via polyurethane matrix grafted onto functionalized CdS nanocrystals.

Controllable Fabrication of Nanocrystal-Polymer Hybrids Via the Catalytic Chain Transfer Polymerization Process

Synthesis and Characterization of Polymer-Cds Nanocomposites

In Situ Synthesis of Transparent Fluorescent ZnS–polymer Nanocomposite Hybrids Through Catalytic Chain Transfer Polymerization Technique

Synthesis of CdS Nanocrystal Within Copolymer

Flexible photocatalytic membrane based on CdS/PMMA polymeric nanocomposite films: multifunctional materials

Hybridization of thiol-functionalized poly(phenylacetylene) with cadmium sulfide nanorods: improved miscibility and enhanced photoconductivity.

Synthesis of CdS/SiO 2 /polymer Tri-Layer Fluorescent Nanospheres with Functional Polymer Shells

Synthesis and Characterization of PMMA/CdSe Nanocomposites Parpared by in Situ Bulk Polymerization

Light emitting CdS quantum dots in PMMA: Synthesis and optical studies

Photochemical Preparation of Cds Nanoparticles on Carboxyl- Functionalized Copolymer Microspheres and Their Visible-Light Photocatalytic Activities

In Situ Synthesis of Transparent Fluorescent Cadmium Sulfide–poly(arylene Ether Ketone) Nanocomposite Hybrids

Preparation of Hybrid Nanomaterial Polymer/MS/SiO2 ( M=Pb, Cd) Using Combining Sol- gel and Hvdrothermal Crystallization

From Water-Soluble CdTe Nanocrystals to Fluorescent Nanocrystal–Polymer Transparent Composites Using Polymerizable Surfactants

Synthesis of CdS Nanocrystals in Polymer-impregnated Sol-gel Silica Matrix

Synthesis and Properties of Transparent Luminescent Nanocomposites with Surface Functionalized Semiconductor Nanocrystals

CdS-Nanoparticle/Polymer Composite Shells Grown on Silica Nanospheres by Atom-Transfer Radical Polymerization

In Situ Synthesis of Size-Controlled Silver/Poly(Methyl Methacrylate) Nanocomposite

Poly(N-Vinyl-2-Pyrrolidone)-Capped Cds Nanocrystals: Polyol Synthesis, Characterization And Visible-Light Photocatalysis

Synthesis Of Short Cds Nanofiber/Poly(Styrene-Alt-Maleic Anhydride) Composites Using Gamma-Irradiation