Abstract:：Buckling is one of the most important failure modes for thin-walled cylindrical shell structures under axial compression loads.Based on the fact that the load carrying capacity of thin-walled cylindrical shell structures under axial compression loads are very sensitive to initial imperfections, the theoretical, experimental and numerical research works done by domestic and foreign researchers for more than half a century in considering the influence of initial imperfections on the critical buckling load of axial loaded cylindrical shells are systematically reviewed.Researches have shown that two kinds of equivalent methods to consider the effects of initial imperfections have been established, namely, the deterministic approach based on numerical analysis and the non-deterministic approach under statistical probabilistic theory.Specifically, the former mainly focuses on the initial geometric imperfections, while the latter also includes non-traditional initial imperfections, such as material, thickness and loading imperfections, etc.These two methods have their own characteristics and advantages in predicting the axial load carrying capability of cylindrical shells and conducting buckling design.Compared with the test results, the highest prediction accuracy of the multiple perturbation load approach and single boundary perturbation approach can reach more than 90% and also has a certain safety margin simultaneously.Finally, some research direction and relevant urgent works in the future about the buckling problems of thin-walled cylindrical shell structures considering initial imperfection sensitivity are pointed out, which can provide some guides for related researches. Key words： thin-walled

The Impact Torsional Buckling of Elastic Cylindrical Shells with Arbitrary Form Imperfection

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Analytical Study on the Buckling of Cylindrical Shells with Arbitrary Thickness Imperfections under Axial Compression

Buckling of cylindrical shells with general axisymmetric thickness imperfections under external pressure

Impact Buckling and Post-Buckling of Elasto-Viscoplastic Cylindrical Shell under Torsion

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Research on Buckling Load Numerical Method of Cylindrical Shells with Initial Imperfection

Postbuckling Behaviour of Anisotropic Shear Deformable Laminated Cylindrical Shells with General Imperfection Distribution Subjected to Torsion

DYNAMIC BUCKLING OF STATICALLY PRELOADED RING-STIFFENED CYLINDRICAL SHELLS UNDER AXIAL FLUID-SOLID IMPACT LOADING

THE IMPACT TORSIONAL BUCKLING FOR THE RIGID PLASTIC CYLINDRICAL SHELL

STUDIES ON THE TORSIONAL BUCKLING OF ELASTIC CYLINDRICAL SHELLS

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Buckling of step cylindrical shells under axial impact load

Buckling of the Axially Compressed Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

Dynamic Buckling of a Cylindrical Shell with a General Boundary Condition under an Axial Impact

Effect of Local Geometric Imperfections on Axial Buckling of Welded Steel Tanks

Buckling and Postbuckling of Stiffened Cylindrical Shells under Axial Compression