Abstract:The overall structural integrity and longevity of modern high-performance ship structures are significantly affected by the mechanical properties of plate-beam connectors, which are critical components in these structures. As global maritime strategic needs continue to evolve, understanding the behavior of high-strength steel structures under extreme dynamic loading has become increasingly crucial. This paper investigates the effects of heat input on microstructural evolution and dynamic fracture behavior in 8NiCrMoV high-strength steel T-joints using laser-MAG hybrid welding. A comprehensive multi-scale analysis is achieved through the development of a temperature field model for the laser-MAG hybrid heat source, coupled with high-speed camera and acceleration sensing technology. The results show that T-joints under low heat input (13.81 kJ/cm) exhibit superior dynamic mechanical properties, exhibiting 81.4% higher impact fracture energy and 47.2% greater maximum displacement compared to T-joints welded at 18.62 kJ/cm. The microstructure of weld metal primarily comprises acicular ferrite, granular bainite (GB), and plate-like bainite. Temperature distribution during the laser-MAG hybrid welding indicates that the microstructure gradient and microhardness within the heat-affected zone (HAZ) emerge as key determinants of impact toughness. The higher heat input leads to grain coarsening and precipitation of GB, with a 384.1% increase in average grain size when the heat input rises from 13.81 to 18.62 kJ/cm. The existence of hardenable lath martensite and GB in the HAZ results in reduced impact toughness. Especially under high heat input, the precipitation of these microstructures and high-hardness second-phase particles can cause the initiation and propagation of cracks in the HAZ.

Research on Laser-arc Hybrid Welding Process of Thick Ship Plates

Research on the dynamic process and defect formation in laser-arc hybrid welding of 12-mm thick AH36 steel

Effect of Process Parameters on the Formability, Microstructure, and Mechanical Properties of Laser-Arc Hybrid Welding of Q355B Steel

Welding of thick stainless steel plates up to 50 mm with high brightness lasers

Effects of heat source configuration on the welding process and joint formation in ultra-high power laser-MAG hybrid welding

Research on weld formation mechanism of laser-MIG arc hybrid welding with butt gap

Process stability during fiber laser-arc hybrid welding of thick steel plates

Investigations on laser beam welding of thick steel plates using a high-power diode laser beam source

Microstructure and Mechanical Properties of Narrow Gap Laser-Arc Hybrid Welded 40 mm Thick Mild Steel

Study of Microstructural Inhomogeneity and Its Effects on Mechanical Properties of Multi-Layer Laser Welded Joint

Interactions of the process parameters and mechanical properties of laser butt welds in thin high strength low alloy steel plates

Welding stability and fatigue performance of laser welded low alloy high strength steel with 20 mm thickness

Investigation of Weld Root Defects in High-Power Full-Penetration Laser Welding of High-Strength Steel

Simulation Study on Weld Formation in Full Penetration Laser + MIG Hybrid Welding of Copper Alloy

Penetration status of carbon dioxide laser-MIG hybrid butt welding with various parameters

Investigation on microstructure and dynamic fracture behavior of high-strength steel welded by LAHW under different heat inputs

Microstructure and Performance of Hybrid Laser-Arc Welded 40 Mm Thick 316 L Steel Plates

Numerical Simulation Study of Welding Process of AH32 Ship Plate Steel

Progress on laser-plasma arc hybrid welding

Investigations on high-power laser beam-submerged arc hybrid welding of thick duplex stainless steel using laser beam wobbling

Effect of liquid column on process stability and weld formation under ultra-high power fiber laser-arc hybrid welding of thick plates