Abstract:We demonstrate here that the electrochemical generation of hydroxyl ions and hydrogen bubbles can be used to induce the synthesis of enzyme- or protein-encapsulated 3D porous silica structure on the surface of noble metal electrodes. In the present work, the one-step synthesis of a glucose oxidase (GOD)-encapsulated silica matrix on a platinum electrode is presented. In this process, glucose oxidase was mixed with ethanol and TEOS to form a doped precursory sol solution. The electrochemically generated hydrogen bubbles at negative potentials assisted the formation of the porous structure of a GOD-encapsulated silica gel, and then the one-step immobilization of enzyme into the silica matrix was achieved. Scanning electron microscopy (SEM) and scanning electrochemical microscopy (SECM) characterizations showed that the GOD-encapsulated silica matrix adhered to the electrode surface effectively and had an interconnected porous structure. Because the pores started at the electrode surface, their sizes increased gradually along the distance away from the electrode and reached maximum at the solution side, and effective mass transport to the electrode surface could be achieved. The entrapped enzyme in the silica matrix retained its activity. The present glucose biosensor had a short response time of 2 s and showed a linear response to glucose from 0 to 10 mM with a correlation coefficient of 0.9932. The detection limit was estimated to be 0.01 mM at a signal-to-noise ratio of 3. The apparent Michaelis -Menten constant (K-m(app)) and the maximum current density were determined to be 20.3 mM and 112.4,mu A cm(-2), respectively. The present method offers a facile way to fabricate biosensors and bioelectronic devices in situ.

Mesoporous MnO2 as enzyme immobilization host for amperometric glucose biosensor construction

Genetically Engineered Phage-Templated MnO2 Nanowires: Synthesis and Their Application in Electrochemical Glucose Biosensor Operated at Neutral Ph Condition

Amperometric biosensors based on carbon paste electrodes modified with nanostructured mixed-valence manganese oxides and glucose oxidase.

Fabrication of an Amperometric Biosensor Based on the Immobilization of Glucose Oxidase in a Modified Molecular Sieve Matrix

Construction of Amperometric Glucose Biosensor Based on In-Situ Fabricated Hierarchical Meso-Macroporous SiO2 Modified Au Film Electrodes

Bio-inspired Formation of Mesoporous LiNbO3 Nanotubes and Application for Glucose Biosensor

Ti3C2Tx MXene/Graphene/AuNPs 3D porous composites for high sensitivity and fast response glucose biosensing

Novel amperometric glucose biosensor based on MXene nanocomposite

Fabrication of MnOx/Ni(OH)2 Electro-Deposited Sulfonated Polyimides/graphene Nano-Sheets Membrane and Used for Electrochemical Sensing of Glucose

One-pot Electrodeposition of 3-Aminopropyltriethoxysilane–chitosan Hybrid Gel Film to Immobilize Glucose Oxidase for Biosensing

A bienzyme channeling glucose sensor with a wide concentration range based on co-entrapment of enzymes in SBA-15 mesopores.

Facile Preparation of Mesocellular Graphene Foam for Direct Glucose Oxidase Electrochemistry and Sensitive Glucose Sensing

A Glucose Electrochemical Sensor Based on Glucose Oxidase Immobilized in Aminopropyl-Magnesium Phyllosilicate Nanosheets Matrix

Formation of MnO2-coated ITO electrodes with high catalytic activity for enzymatic glucose detection

Preparation of magnetic Fe 3 O 4 /PPy@ZIF-8 nanocomposite for glucose oxidase immobilization and used as glucose electrochemical biosensor

Al2O3 Sol–gel Derived Amperometric Biosensor for Glucose

A Novel Stable Amperometric Glucose Biosensor Based on the Adsorption of Glucose Oxidase on Poly(methyl Methacrylate)–bovine Serum Albumin Core–shell Nanoparticles

One-Step Immobilization Of Glucose Oxidase In A Silica Matrix On A Pt Electrode By An Electrochemically Induced Sol-Gel Process

Electrochemistry and biosensing of glucose oxidase immobilized on Pt-dispersed mesoporous carbon

Immobilization of glucose oxidase on rod-like and vesicle-like mesoporous silica for enhancing current responses of glucose biosensors

An Amperometric Biosensor Based on Glucose Oxidase Immobilized in A Sol-Gel Polyvinyl Alcohol/Silica Hybrid Composite Film on A Prussian Blue Modified Electrode