Abstract:Tailings sand is the dam-building material of the tailings dam accumulation sub-dam, and its mechanical properties directly affect the safety and stability of the whole tailings dam. With the improvement of mineral sorting technology, the content of fine and ultrafine particles in the tailings gradually increases, which will affect the mechanical strength of tailings accumulation sub-dam. To improve the settling effect of tailings accumulation in the Chengchao iron ore mine (China), the effect of iron tailings flocculation and settling law on the mechanical properties of tailings sand was studied. Polymerized iron sulfate (PFS) as an inorganic polymer flocculant, compared with the traditional flocculant, has a stronger flocculation and adsorption capacity, is widely used in drinking water, industrial wastewater, and domestic sewage treatment, is an anionic polyacrylamide (APAM-800) for polymer compounds, mainly divided into nonionic, cationic, and anionic three, and is commonly used mine flocculant at home and abroad. Through different flocculants, PFS, and APAM-800 compound flocculation and settling experiments, the effect of the flocculant-dosing scheme on the settling rate and turbidity of clarified liquid was determined, and the change in tailings consolidation shear strength of the best dosing scheme was measured. The experimental results showed that the settling rate of iron tailings was the fastest when PFS was used in combination with APAM-800 at 1.2 g L−1 and 0.20 g·L−1 dosages, respectively. The direct shear test results showed that the internal friction angle of tailings sand increased by 2.18°, the cohesion increased by 5.814 kPa, and the shear resistance of flocculated settled tailings increased, which can effectively improve the safety factor of tailings sand pile sub-dam.

Optimization of hydrodynamic conditions in coagulation process and study of floc size characteristics

Optimization of Hydraulic Condition on Flocculation for Micro-polluted Water

A Comparative Study Of Conventional Coagulation And Sludge Recycling Enhanced Coagulation For Low-Turbidity Source Water: The Effect And Applicability

Study on Leaching at the Early Stage of Highly Efficient Flocculants

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Multiple Response Optimization of the Coagulation Process for Upgrading the Quality of Effluent from Municipal Wastewater Treatment Plant

Characterization and coagulation–flocculation performance of a composite coagulant: poly-ferric-aluminum-silicate-sulfate

Optimization of the Coagulation-Flocculation Process for Pulp Mill Wastewater Treatment Using a Combination of Uniform Design and Response Surface Methodology

Research on control parameter of efficient flocculation basin

Application of Flocculation Combined with Vacuum Preloading to Reduce River-Dredged Sludge

Preparation and Application of Microbial Flocculant

Screening on Complexation and Applicatiom of Compound Microbial Flocculant and Chemical Flocculant

In-situ microscopy investigation of floc development during coagulation-flocculation with chemical and natural coagulants

Study on optimal conditions of flocculation in deinking wastewater treatment

Pilot Study of Coagulation/immersed Ultrafiltration Treatment of Micro-Polluted Surface Water

Study on the Enhanced Coagulation During the Treatment of High Algae-laden Raw Water with DAF

The Optimal Experimental Research on the Fluoride Removal from Efficient-Whirling Clarifier

Study on New Composite Flocculants in Dewantering of Dredged Sediments and Solidification of Heavy Metals

Mechanistic Investigation of an Inorganic-Organic Hybrid Coagulant with Fe3O4 Magnetic Loading-Enhanced Flocculation for Water Treatment

Study on the Effect of Flocculation and Sedimentation on the Mechanical Properties of Iron Tailing Sand

Characteristics of coagulation-flocculation of humic acid with effective performance of polymeric flocculant and inorganic coagulant