Synthesis and Characterization of La-containing SiMCM-41

Nongyue He,Shulin Bao,Qinhua Xu

DOI: https://doi.org/10.1007/bf03182617

1997-01-01

Abstract:FOR the reactions of larger molecules, the preparation of zeolites with large pore size has been a very important subject in zeolite chemistry. The mesoporous molecular sieves designated MCM-41 with pore size in the range from 2 to>10 nm was first reported by researchers from

What problem does this paper attempt to address?

Synthesis and Characterization of AlMCM-41 Molecular Sieves

Y Sun,YH Yue,Z Gao

DOI: https://doi.org/10.1016/s0926-860x(97)00036-7

1997-01-01

Abstract:The synthesis of AlMCM-41 molecular sieves with Si/Al ratios 14–32 is reported. Intermittent pH adjustments during synthesis may improve the long-range order of the mesopores. N2 adsorption and27Al MAS NMR experiments reveal that all the AlMCM-41 samples contain a small amount of aluminum-rich extra-framework species both inside and outside the mesoporous channels after calcination. The proton exchanged AlMCM-41 catalysts are weak-medium acidic, and are catalytically active for isopropanol dehydration at moderate temperature and for cumene cracking at high temperature.
Synthesis and Characterization of the Gallosilicate Mesoporous Molecular Sieve Mcm-41

CF Cheng,HY He,WZ Zhou,J Klinowski,JAS Goncalves,LF Gladden

DOI: https://doi.org/10.1021/jp952410t

1996-01-01

Journal of the Chemical Society Faraday Transactions

Abstract:A range of mesoporous gallosilicate molecular sieves with the MCM-41 structure have been synthesized using gallium nitrate as the source of gallium and characterized in detail by elemental analysis, XRD, 71Ga and 29Si MAS NMR, N2 adsorption measurements, and TEM. The quality of the products is very sensitive to the pH of the gel mixture. Atomic absorption and XRD show that Ga and Si in the gel are incorporated into the MCM-41 structure in nearly equal proportions. 71Ga and 29Si NMR demonstrate that in all as-made samples gallium is 4-coordinate and forms a part of the MCM-41 structure. Although upon calcination gallium is partially expelled from the structure of samples with Si/Ga ≤ 20, Ga in samples with Si/Ga ≥ 30 is unaffected. N2 adsorption measurements and TEM demonstrate the high mesoporosity of gallosilicate MCM-41-30. The pore size distribution indicates that the structure of sample MCM-41-20 partially collapses upon calcination and macropores are formed.
Synthesis and characterization of MCM-49/ZSM-35 composite zeolites in the hexamethyleneimine and cyclohexamine system

Sujuan Xie,Shenglin Liu,Yong Liu,Xiujie Li,Weiping Zhang,Longya Xu

DOI: https://doi.org/10.1016/j.micromeso.2009.01.027

IF: 5.876

2009-01-01

Microporous and Mesoporous Materials

Abstract:A novel route for synthesis of MCM-49/ZSM-35 composite zeolites with different compositions in a mixed amine system containing hexamethyleneimine (HMI) and cyclohexamine (CHA) has been developed. Furthermore, both MCM-49 zeolite and ZSM-35 zeolite can be successfully synthesized by adjusting the synthesis conditions in the same system. Especially, the MCM-49/ZSM-35 composites with more content of ZSM-35 zeolite can be produced under conditions of larger CHA/HMI molar ratio, higher Na2O/Al2O3 molar ratio and longer crystallization time. The structure characterization, acid distribution and morphology of the MCM-49/ZSM-35 composite zeolites are characterized by X-ray diffraction, N2 adsorption isotherms, NH3-TPD, scanning electron microscopy as well as HP-129Xe NMR technology. These characterizations give obvious different pore structure of the MCM-49/ZSM-35 composite zeolites from the mechanical mixing counterpart.
Synthesis and Characterization of Mesoporous Zr-MCM-41

李福祥,张香娣,李瑞丰,谢克昌

DOI: https://doi.org/10.3969/j.issn.0253-2409.2004.04.017

2004-01-01

Journal of Fuel Chemistry and Technology

Abstract:Zr-MCM-41 mesoporous materials were prepared via a direct-synthesis method using Zr(NO_3)_4·3H_2O as a precursor. The samples were characterized with XRD (X-ray Diffraction), TG-DTA (Thermogravimetry-Differential Thermal Analysis) and N_2 adsorption. The effects of Zr/Si molar ratio on the Zr-MCM-41 were then investigated. The results show that the peak of 100 near 2θ=2° in XRD patterns becomes weaker with the increase of Zr/Si molar ratio. To obtain the mesoporous Zr-MCM-41, the maximum of Zr/Si molar ratio is 0.25. The BET area of the Zr-MCM-41samples decreases with the increase of Zr/Si ratio, but the pore size keeps as 2.75?nm～2.97?nm.
Synthesis of Mesoporous Molecular Sieve Mcm-41 in Extremely Dense System

GH Liu,RJ Gao,H Xu,JX Dong

IF: 9.1

1997-01-01

Chinese Chemical Letters

Abstract:Mesoporous molecular sieve MCM-41 has been synthesized in the extremely dense system (with H2O/Si<10) and characterized by XRD, N-2 adsorption isotherm as well as probe reactions of cracking of cumene and isomerization of o-xylene.
Synthesis and properties of mesoporous molecular sieve MCM-41 form extremely dense system

Jinxiang Dong,Guanghuan Liu,Ruijun Gao, Xu

1997-01-01

Chinese journal of inorganic chemistry

Abstract:In extremely dense system controlling H 2O/ Si �� 5 from amorphous gel Na 2O- SiO 2- CTAB (cetyltrimethylammonium bromite)-H 2O, the synthesis conditions of mesoporous molecular sieve Si-MCM-41 have been studied. Molecular sieve Si-MCM-41 have been prepared in H 2O/Si=1. 0-5. 0, CTAB/Si= 0. 0125-0. 125, Na/Si = 0. 05 - 0. 15. The characteristic of the method is clearly decreasing consumption amount of CTAB. As-synthesized samples have been characterized by XRD, SEM, TG-DTA and N 2 adsorption isothermals. These demonstrated that products possess typical properties of molecular sieve MCM-41.
Influence of cations (Li+, Na+, K+)for synthesis mesoporous molecular sieve MCM-41 and their properties

Jinxiang Dong,Ping Dong,Guanghuan Liu,Jinan Sun

1997-01-01

Abstract:The conditions for hydrothermal synthesis of mesoporous molecular sieve MCM-41 have been studied in gel M2O (M=Li, Na, K)-Al2O3-SiO2-CTMAB-H2O system. Experiments indicated that KOH showed better performance to replace NaOH as an inorganic alkali to synthesize molecular sieve MCM-41. As synthesized samples were characterized by XRD, SEM, TG and N2 adsorption isothermals.
Synthesis and properties of mesoporous molecular sieve MCM-41 from extreme dense system with auxiliary alkanes

Guanghuan Liu,Rui Juan Gao,Hong Xu,Jinxiang Dong

1997-01-01

Abstract:In the extreme dense system of H 2O/Si��8.0, the influences of auxiliary alkanes - n-hexane, n-heptane, i-octane and n-octadecane to the synthesise of mesoporous molecular sieve MCM-41 have been studied. The experiments demonstrated that auxiliary alkanes possessed promoting function for preparing molecular sieve MCM-41 with more than 4nm pore diameter in system with very low H 2O synthesized samples have been charaterized by XRD, SEM and N 2 isothermal adsorption. These demonstrated that the products possessed typical properties of MCM-41 molecular sieve.
Synthesis of Mesoporous Manganosilicates - Mn-Mcm-41, Mn-Mcm-48 and Mn-Mcm-L

DY ZHAO,D GOLDFARB

DOI: https://doi.org/10.1039/c39950000875

1995-01-01

ChemInform

Abstract:Mesoporous manganosilicate materials Mn-M41S, having hexagonal, cubic and lamellar structures, are synthesized with a low surfactant:Si ratio (0.12:1) at various temperatures and acid/base contents and are characterized by X-ray powder diffraction and Q-band EPR spectroscopy.
Synthesis and Characterization of Stable Framework-Iron Containing Mesoporous Molecular Sieves Fe-Mcm-41

Liu Cai-Hua,Wang Wen-Juan,Cheng Wen-Ping,Yu Xin-Yu,Yang Jian-Guo,He Ming-Yuan

DOI: https://doi.org/10.3724/sp.j.1077.2008.00171

2008-01-01

Abstract:Mesoporous Fe-MCM-41 materials were synthesized by using ionic liquid 1-cethyl-3-methylimidazolium bromide ([C(16)mim]Br-+(-)) as template at room temperature and characterized by X-ray diffraction, N-2 adsorption-desorption, FT-IR, EPR, UV-Vis. Results show that these mesoporous materials possess high surface area. The pore size distributions of Fe-MCM-41 show that there are two types mesoporous. Part of iron atom still retain in the framework after removal of the template by calcination except those transferring to the wall surface. Fe species on wall surface are, of high dispersion. This indicates that stable framework-iron containing mesoporous molecular sieves Fe-MCM-41 can be successfully synthesized.
Preparation of MCM-41 with high thermal stability and complementary textural porosity

Huxing Chen,Yingchun Wang

DOI: https://doi.org/10.1016/S0272-8842(02)00007-X

IF: 5.532

2002-01-01

Ceramics International

Abstract:Preparation of mesoporous molecular sieve MCM-41 with complementary textural porosity and high thermal stability that results from thicker wall has been achieved by decreasing surfactant/silicon ratio of synthesis gel. MCM-41 material obtained by using the surfactant/silicon molar ratio of 0.10 consists of large and well-defined spherical particles. A further decrease in the ratio results in the formation of MCM-41 silica with the bimodal framework meopores and complementary textural porosity. The textural porosity results from the loose aggregate structure. The resultant materials retain ordered channels and large BET surface area even after thermal treatment at 1273 K for 1 h in air. The complementary textural porosity decreases the length of the one-dimensional mesopores and provides the facilitating framework access for the diffusion of mass.
Influences of anions X-(F-, Cl-, Br-) on synthesis and properties of mesoporous molecular sieve MCM -41

Guanghuan Liu,Feng Zhou,Hong Xu,Jinxiang Dong,Jinan Sun

1997-01-01

Journal of Fuel Chemistry and Technology

Abstract:The conditions for hydrothermal systhesis of mesoporous molecular sieve MCM -41 have been studied in gel NaX(F-, Cl-, Br-)- Na2O - Al2O3- SiO2- CTAB - H2O. At a crystalline temperature of 398K, crystalline time of 8��16 days and NaX/SiO2 of 0.01�� 0.05 molecular sieve MCM -41 can be prepared. Addtion of NaF can accelate relative crystalline rate but NaBr results in prohibitive effect to the formation of molecular sieve MCM - 41. Characterizations using XRD, SEM, TG-DTA and N2 adsorption indicated that the synthesized samples possess the properties of mesoporous molecular sieve.
The Synthesis of Mesoporous Molecular Sieve MCM-48

Qiang Cai,Hui B. Zhang,Wenyong Lin,Wenqin Pang

1999-01-01

Abstract:Mesoporous molecular sieve MCM-48 was prepared hydrothermally with CTAB, NaOH, TEOS as source materials. Characterization results obtained from the determination of XRD, TEM, Nz-adsorption, IR spectra and TG-DTA show that the products possess similar structure properties as those reported in literatures, Various synthesis parameters, including crystallization time, crystallization temperature and starting gel composition, have been studied. It was found that the crystallization temperature of 373 K was preferable, lower temperature leading to weak crystallinity, higher temperature leading to amorphous material. Crystallization time of 3 d was found suitable for MCM-48 formation, shorter time resulting in a low crystallinity, The influence of composition features such as n(H2O) / n(SiO2) and n(CTAB) / n(SiO2) on the product was studied.
Preparation of mesoporous Al-MCM-41 with stable tetrahedral aluminum using ionic liquids as a single template

Caihua Liu,Xinyu Yu,Jianguo Yang,Mingyuan He

DOI: https://doi.org/10.1016/j.matlet.2007.04.043

IF: 3

2007-01-01

Materials Letters

Abstract:Mesoporous Al-MCM-41 materials were synthesized using room temperature ionic liquid 1-cethyl-3-methylimidazolium bromide ([C16mim]Br) as a single template and characterized by X-ray diffraction, N2 adsorption–desorption, ICP-AES, 27Al MAS NMR and TEM technique. These mesoporous materials exhibit hexagonal p6m pore architectures, and possess high surface area and narrow pore distribution. All aluminum in as-synthesized samples exists in tetrahedral coordination. Upon calcination nearly all aluminum still remains the tetrahedral coordination even when the Si/Al ratio is as low as 15. This indicates that the tetrahedral aluminum of Al-MCM-41 is stable.
Synthesis of MCM-22/MCM-41 composites with zeolite MCM-22 as a precursor

Li Yuping,Zhang Wei,Wang Xiaoli,Dou Tao,Xie Kechang

DOI: https://doi.org/10.1016/S0167-2991(07)80366-1

2007-01-01

Abstract:null
New Mineralization Agents for the Synthesis of MCM-41

Wenyong Lin,Qiang Cai,Wenqin Pang,Yong Yue,Bensan Zou

DOI: https://doi.org/10.1016/s1387-1811(99)00137-7

IF: 5.876

1999-01-01

Microporous and Mesoporous Materials

Abstract:Silicate and aluminosilicate MCM-41 molecular sieves have been synthesized in the presence of various new mineralization agents, such as methylamine, dimethylamine, ethylamine and diethylamine. The products were characterized with a series of techniques. XRD, TEM and nitrogen adsorption-desorption measurements suggest that the products possess highly ordered structures. 29Si NMR results show that the resultant mesophase frameworks are condensed with a higher degree than those of products prepared with NaOH as the mineralization agent. These alkali-metal-free synthesis media offer a simple and effective method for the direct preparation of high quality H-type aluminosilicate MCM-41, as shown by XRD, 27Al NMR and NH3 TPD results. Both the pure silica and the aluminum-containing samples exhibit excellent thermal (in air up to 1373K) and hydrothermal stability (in hot water of 353K, 48h for the former and 72h for the later). The formation of the high quality MCM-41 material is discussed in terms of a buffer effect of the synthesis media, which is due to the presence of the new mineralization agents. The evidence was obtained by monitoring the pH values of the synthesis.
Transformation of Lamellar Silicate into the Mesoporous Molecular Sieve MCM-41

ZH Luan,HY He,WZ Zhou,J Klinowski

DOI: https://doi.org/10.1039/a707828e

1998-01-01

Journal of the Chemical Society Faraday Transactions

Abstract:Mesoporous silicates synthesized in strongly basic media from sodium silicate in the presence of cetyltrimethylammonium chloride, a cationic surfactant. The formation of a lamellar phase and its transformation into hexagonal MCM-41 were studied by powder X-ray diffraction (XRD), Si-29 magic-angle-spinning (MAS) NMR and transmission electron microscopy (TEM). The gel mixture (pH > 14) is transparent. Upon acidification, a layered phase with interplanar spacing d = 35 Angstrom rapidly forms at pH = 13 and gradually transforms into the lamellar phase with d = 31 Angstrom. The Si-29 MAS NMR spectrum of the layered phase is broad and dominated by the resonance from Si(OSi)(3)O-M+ (Q(3)) structural units (M stands for the surfactant cation). The spectrum of the lamellar phase is well resolved with a more intense line from the Si(OSi)(4) (Q(4)) structural units, indicating a more regular atomic arrangement. The hexagonal phase is obtained at pH = 11.5 upon acidification of the gel, or when the pH of the intermediate product containing the lamellar phase is adjusted to 7-9 and the hydrothermal treatment continued. The hexagonal phase gives a broad Si-29 NMR spectrum dominated by the Q(4) resonance, indicating a less ordered local atomic arrangement in comparison with the lamellar phase. We suggest that the transformation is driven by the increasing reactivity of the silicate species with increasing acidity of the gel, which facilitates further aggregation of uncondensed silicate between the layers.
Structural Characteristics Of Mcm-41 Synthesized In-Situ On Silica

J He,X Duan,Cy Li,Yx Zhu

DOI: https://doi.org/10.3321/j.issn:1001-4861.2002.02.009

2002-01-01

Chinese journal of inorganic chemistry

Abstract:MCM-41 has been synthesized in-situ on silica both using solution silicate and surface silicate as Si sources. The long-range structure of MCM-41 synthesized with solution silicate as Si source is better than that of MCM-41 with surface silicate as Si source, while either is as stable as to preserve the long-range ordered structure during calcination. For the MCM-41 sample synthesized with surface silicate as Si source, the pore diameters are narrowly distributed with approximately 3.81nm in the maximum distribution.
Synthesis and Characterization of Vanadosilicate Mesoporousmolecularsieves MCM-41

DH Park,CF Cheng,HY He,J Klinowski

DOI: https://doi.org/10.1039/a604029b

1997-01-01

Journal of Materials Chemistry

Abstract:A range of mesoporous vanadosilicate molecular sieves with the MCM-41 structure and the atomic ratio Si/V = 10-160 have been synthesized using vanadyl sulfate as the source of vanadium. The products were characterized by XRD and V-51 and Si-29 MAS NMR spectroscopy. The increase of the unit-cell parameter (monitored by XRD) and the decrease of the Q(3)/Q(4) ratio (determined from the Si-29 spectra) with increasing vanadium content indicate the incorporation of vanadium into the MCM-41 structure. In as-synthesized [Si,V]-MCM-41, vanadium is in an octahedral environment and is located mainly on the surface of the channels, The amount of octahedral vanadium decreases and tetrahedral V is increasingly created as the calcination temperature increases.
Synthesis Of Mcm-41 Under Ultrasonic Conditions

Ym Liu,Yy Qin,Yk Lv,Wr Bao,T Dou,Kc Xie

DOI: https://doi.org/10.1016/s0167-2991(05)80189-2

2005-01-01

Abstract:MCM-41 was successfully synthesized in acid system under ultrasonic conditions using cetyltrimethylammonium bromide (CTMABr) as the template and tetraethyl orthosilicate (TEOS) as silica source. It is shown that synthesis under ultrasonic conditions (US) is an effective process to produce high-quality mesoporous silica within shorter time compared with the conventional hydrothermal synthesis (RHS) at room temperature. Characterization results revealed that MCM-41 synthesized under ultrasonic conditions has a regular spherical morphology with a diameter range of 1-4 mu m (average 2 mu m) and has a very low content of impurity. In the present paper, the influence of initial reaction composition, treatment conditions, and ultrasonic power on the degree of structural ordering were investigated to optimize synthesis conditions. The optimum ultrasonic power was found to be about 460 W and the ultrasonic treatment time was at least 2 h. Moreover, the influence of ultrasonic effect on the synthesis mechanism of MCM-41 was also discussed.

Synthesis and Characterization of La-containing SiMCM-41

Synthesis and Characterization of AlMCM-41 Molecular Sieves

Synthesis and Characterization of the Gallosilicate Mesoporous Molecular Sieve Mcm-41

Synthesis and characterization of MCM-49/ZSM-35 composite zeolites in the hexamethyleneimine and cyclohexamine system

Synthesis and Characterization of Mesoporous Zr-MCM-41

Synthesis of Mesoporous Molecular Sieve Mcm-41 in Extremely Dense System

Synthesis and properties of mesoporous molecular sieve MCM-41 form extremely dense system

Influence of cations (Li+, Na+, K+)for synthesis mesoporous molecular sieve MCM-41 and their properties

Synthesis and properties of mesoporous molecular sieve MCM-41 from extreme dense system with auxiliary alkanes

Synthesis of Mesoporous Manganosilicates - Mn-Mcm-41, Mn-Mcm-48 and Mn-Mcm-L

Synthesis and Characterization of Stable Framework-Iron Containing Mesoporous Molecular Sieves Fe-Mcm-41

Preparation of MCM-41 with high thermal stability and complementary textural porosity

Influences of anions X-(F-, Cl-, Br-) on synthesis and properties of mesoporous molecular sieve MCM -41

The Synthesis of Mesoporous Molecular Sieve MCM-48

Preparation of mesoporous Al-MCM-41 with stable tetrahedral aluminum using ionic liquids as a single template

Synthesis of MCM-22/MCM-41 composites with zeolite MCM-22 as a precursor

New Mineralization Agents for the Synthesis of MCM-41

Transformation of Lamellar Silicate into the Mesoporous Molecular Sieve MCM-41

Structural Characteristics Of Mcm-41 Synthesized In-Situ On Silica

Synthesis and Characterization of Vanadosilicate Mesoporousmolecularsieves MCM-41

Synthesis Of Mcm-41 Under Ultrasonic Conditions