Abstract:Nafion, the state-of-the-art-of proton exchange membrane in fuel cell, is a copolymer with a randomly tethered side-chain terminated by a pendant sulfonic acid groups adjacent to the polytetrafluoroethylene (PTFE) backbone. The PTFE backbone is hydrophobic and insulative, whereas the sulfonic acid groups are hydrophilic and proton-conductive. As a result of the intrinsic difference between the backbone and sulfonic acid groups, phase separation occurs during the formation of solid Nafion membranes from ionomer solution via a self-organizing process conducted at elevated temperature. The ionic clusters are formed in hydrophobic matrix by hydrophilic groups, interconnected by slender ionic channels which serve as the proton conductive pathways. Furthermore, the distribution of proton-conductive pathways not only inside but on the surface of the membrane plays a significant role in improving the cell performance. The latter determines the mass transport of H 2 O molecules and protons through the membrane, which is the basis of good performance in fuel cells. In addition, the three-phase boundary (TPB) plays a crucial role in the performance of fuel cells, which means that the electrocatalysts (such as Pt) in fuel cells must directly contact with the conductive hydrophilic regions on the surface of PEMs to minimize the contact resistance and invalid catalysts located in the hydrophobic regions will lead to lower catalyst utilization. However, an excess of hydrophilic groups would cause flooding, and the hydrophobic phase is necessary for supporting mechanical strength and separating reagents in fuel cells. Therefore, in order to further promote fuel cell performance, detailed knowledge of phase separation with Nafion is required, and a good balance between the distributions of hydrophilic and hydrophobic groups is extremely crucial for promising ion exchange membranes. Currently, current-sensing AFM is often used to obtain the imaging of local surface proton conductance. However, the direct current (DC) applied leads to an overall result that is affected by many factors, such as proton conductivity, mass transport and reaction kinetics. Compared to DC methods, alternate current (AC) methods such as electrochemical impedance spectroscopy (EIS) provides a powerful insight to the overall impedance response and individual processes including ionic transport can be distinguished at higher accuracy. In our study, we constructed a home-built AFM-EIS setup and measured the localized impedance by coupling AFM with an impedance tester in a Faraday cage. In contrast to traditional average and macroscopic bulk impedance measurements, we obtained a detailed and spatially diverse distribution of EIS spectra at selected points on Nafion with AFM-EIS. By equivalent electric circuit fitting, we derived the localized pure proton transfer resistance from the EIS spectra; such results cannot be obtained by current-sensing AFM. In addition, with a customized automatic procedure, we performed proton transfer resistance imaging on the Nafion surface in an area of 2 µm*2 µm at different humidities, the results of which confirmed the widely known fact that higher water activities significantly reduce the transport resistance. However, our experimental results show a wide variation in proton transport resistance at a well-equilibrated humidity level of the membrane. Our work has led to the conclusion that the large variation arises mainly from the surface concentration of water channels due to the fact that the transport and reaction kinetics are favoured by the three-phase interface. Furthermore, to elucidate the Nafion microstructure, a numerical simulation was constructed to incorporate morphological and physical variations of the membrane, such as the heterogeneity of the hydrophilic and hydrophobic groups in the membrane, which revealed that at higher water activities, SO 3 H groups cluster to create a matrix of interconnected nano-water channels through which the ions are transported. Figure 1

Charge Transport Performance of Nafion-Based Redox Polymer in Atmosphere

Localized Electrochemical Impedance Measurements on Nafion Membranes: Observation and Analysis of Spatially Diverse Proton Transport Using Atomic Force Microscopy

Stable Aqueous Redox Flow Battery Assembled in Air Atmosphere Employing an Anionic Terpolymer As Active Cathode Material

Controlling π–π Interactions of Highly Soluble Naphthalene Diimide Derivatives for Neutral pH Aqueous Redox Flow Batteries

Effect of trace hydrofluoric acid in a LiPF6 electrolyte on the performance of a Li–organic battery with an N-heterocycle based conjugated microporous polymer as the cathode

Elucidation of charge storage characteristics of conducting polymer film using redox reaction

High-voltage and Durable Ph-Neutral Aqueous Redox Flow Batteries Based on Quaternary Ammonium Cations Functionalized Naphthalene Diimide and Nitroxyl Radical Systems

Interfacial Distribution of Nafion Ionomer Thin Films on Nitrogen-Modified Carbon Surfaces

An Air-Rechargeable Zn-organic Battery with Unprecedented Fast Self-Charging Rate

Hybrid polymer matrix composite containing polyaniline and Nafion as novel precursor of the enhanced catalyst for oxygen reduction reaction

New Insights into the Electrochemistry of Carbonyl- and Amino-Containing Polymers for Rechargeable Zinc–Organic Batteries

The effects of temperature and membrane thickness on the performance of aqueous alkaline redox flow batteries using napthoquinone and ferrocyanide as redox couple

Study of Lithiated Nafion Ionomer for Lithium Batteries

Investigation of Nafion series membranes on the performance of iron‐chromium redox flow battery

Ferrocene/naphthalimide bi-redox molecule for enhancing the cycling stability of symmetric nonaqueous redox flow battery

Coupled Cation-Electron Transfer at Pt(111)/Perfluoro-Sulfonic Acid Ionomer Interface and Kinetic impact on the Oxygen Reduction Reaction

A novel Nafion‐Functionalized Polyethersulfone(PES)‐based ion‐permselective separator for high performance Li‐O2 batteries using LiI as a redox mediator

Impedance spectroscopic study on interfacial ion transfers in cyanide-bridged coordination polymer electrode with organic electrolyte

The Influence of Electrolyte Type on Kinetics of Redox Processes in the Polymer Films of Ni(II) Salen-Type Complexes

A phenazine-based conjugated microporous polymer as a high performing cathode for aluminium-organic batteries

Real-Time Insight into the Doping Mechanism of Redox-Active Organic Radical Polymers