Abstract:Phase change phenomena in microchannels have been projected as an effective option for thermal management of various microscale systems. However, for the design of heat sinks which utilize these phenomena, a clear understanding of the physical mechanisms involved, in the microscale domain, is required. In the present study, a numerical simulation is carried out to predict the characteristics of two phase flow with liquid to vapor phase change, in rectangular microchannels for a range of hydraulic diameters. The annular flow pattern, reported to be the most common in microchannel, has been investigated, with water as the flowing medium. The analysis considers, among other parameters, the effect of surface tension on the flow dynamics, which could be significant in microchannels. The mathematical model is numerically solved using a quasi-three dimensional approach, incorporating the variations in the cross-sectional areas of both the phases along the flow direction. Since it is expected that the continuum approximation may be insufficient in the vapor domain in channels of very small dimensions, an analysis incorporating slip flow at the liquid vapor interface analysis has been performed, where the channel dimensions produce Knudsen number values in the range 0.001–0.1, as suggested in the literature. The liquid film thickness along the flow direction is determined utilizing mass conservation, and the velocity distributions at different locations along the flow direction are obtained by solving the governing differential equations numerically. The two phase pressure drop is calculated for cases demanding slip and no slip conditions. A comparison has been made of the fluid flow characteristics, between the slip and no slip cases for the cases where slip flow is expected. The effects of the imposed heat flux, volume flow rate and channel geometry on the velocity distribution and pressure drop are examined. The predicted pressure drop values are found to increase with increasing heat flux, and decrease with an increase in the flow rate and the channel height. The two phase heat transfer coefficient and the wall temperature of the channel are also determined. The two phase heat transfer coefficient is found to increase with an increase in the vapor quality. It is also noticed that the wall temperature decreases along the length of the channel and the wall temperature at the exit of the channel decreases with decrease in volume flow rate, within the range of parameters used, which is in accordance with observations reported in the literature. The results are found to be in good agreement with the experimental and theoretical results available in the literature.

Research Development of Single Phase Liquid Heat Transfer in Microchannel

Liquid-liquid Two-Phase Flow and Mass Transfer in T-shaped Micro-Channel Network

Theoretical and Experimental Research on Flow Boiling Heat Transfer in Microchannels for IGBT Modules

Flow and Heat Transfer Characteristics in a Microchannel with a Circular Synthetic Jet

Single-phase Convective Heat Transfer in Microchannels

A Review of the Complex Flow and Heat Transfer Characteristics in Microchannels

Micro-Channel Heat Sink: A Review

A comprehensive review on liquid–liquid two-phase flow in microchannel: flow pattern and mass transfer

Research on the Mechanism of Diffusion and Mixing in the Microchannel Flow and Micromixer

SIMULATION AND MICRO-PIV RESEARCH ON CLASSICAL MICROCHANNEL FLOW

Experimental Study on Heat Transfer Characteristics of Two-Phase Flow in Square and Rectangular Channels

On Numerical Simulation Techniques of Stable Crack Growth

A critical review on measures to suppress flow boiling instabilities in microchannels

Experimental and Numerical Analysis on Heat Transfer Performance of Slug Flow in Rectangular Microchannel

Thermal Effects On Fluid Flow In Mini/Micro Channel

Experimental and Numerical Studies of Fluid Flow Confined in Microchannel

Research and development of two-liquid phase flow in micro-structured devices

STUDY ON TWO-PHASE FLOW AND TEMPERATURE UNIFORMITY CHARACTERISTICS OF MICROCHANNEL HEAT PIPE

Investigation on visualization and heat transfer performance study of the mini-channel flow boiling

Bubble dynamics and their effects on interfacial heat transfer in one single microchannel

Computational Study and Optimization of Laminar Heat Transfer and Pressure Loss of Double-Layer Microchannels for Chip Liquid Cooling