Abstract:Permanent magnets (PM) are critical components for electric motors and power generators. Key properties of permanent magnets, especially coercivity and remanent magnetization, are strongly dependent on microstructure. Understanding metallurgical processing, phase stability and microstructural changes are essential for designing and improving permanent magnets. The widely used PM for the traction motor in electric vehicles and for the power generator in wind turbines contain rare earth elements Nd and Dy due to their high maximum energy product. Dy is used to sustain NdFeB's coercivity at higher temperature. Due to the high supply risk of rare earth elements (REE) such as Dy and Nd, these elements are listed as critical materials by the U.S. Department of Energy and other international institutes. Other than Dy, finer grain size is also found to have effect on sustaining coercivity at higher temperature. A proper control of phase stability and microstructures has direct impact on mitigating REE supply risk. Compared to rare earth PMs, non-rare earth (non-RE) PMs typically have lower maximum energy products, however, given their small supply risks and low cost, they are being intensively investigated for less-demanding applications. The general goal for the development of non-RE PMs is to fill in the gap between the most cost-effective but low performing hard ferrite magnet and the most expensive but high performing RE PMs. In the past five years great progress has been made toward improving the microstructure and physical properties of non-RE PMs. Several new candidate materials systems were investigated, and some have showed realistic potential for replacing RE PMs for some applications. In this article, we review the science and technology of various types of non-RE materials for PM applications. These materials systems include Mn based, high magnetocrystalline anisotropy alloys (MnBi and MnAl compounds), spinodally decomposing alloys (Alnico), high-coercivity tetrataenite L10 phase (FeNi and FeCo), and nitride/carbide systems (such as α" based, high saturation magnetization Fe16N2 type phase and Co2C/Co3C acicular particle phase). The current status, challenges, potentials as well as the future directions for these candidates non-RE magnet materials are discussed.

General Survey of Rare Earth Function Materials

The Application of Rare Earth Element in Amorphous Alloy

Beyond rare earths

High-entropy rare earth materials: synthesis, application and outlook

Application of Rare Earth in Coatings Industry

The electrochemical applications of rare earth-based nanomaterials.

Rare Earth Incorporated Electrode Materials for Advanced Energy Storage

Rare Earths—The Answer to Everything

The Rare Earth Elements: Demand, Global Resources, and Challenges for Resourcing Future Generations

Global rare earth element resources: A concise review

Research progress on magnetic-fluorescent different rare-earth fluorescent host-based nanocomposites

Advances, optical and electronic applications of functional materials based on rare earth sulfide semiconductors

Overview of Functionalized Porous Materials for Rare-Earth Element Separation and Recovery

Development and beneficiation technology of rare earth ores in China

Preparation and Application of Rare Earth Sulfides

Prospect and status of iron-based rare-earth-free permanent magnetic materials

Ultrathin 2D Rare‐Earth Nanomaterials: Compositions, Syntheses, and Applications

Current Progress and Future Challenges in Rare-Earth-free Permanent Magnets

Rare earth elements: A review of applications, occurrence, exploration, analysis, recycling, and environmental impact

Advances in Rare Earth Doped Lead Halide Perovskite Luminescence, Optoelectronic Materials and Devices

The vital application of rare earth for future high-performance electromagnetic wave absorption materials: A review