Abstract:Improving the physical and mechanical properties such as hardness and strength of metal thin films can be achieved by incorporating nanoparticles into the pure metals, for example via electrocodeposition. However, the agglomeration of nanoparticles during electrocodeposition of nanocomposite thin films is an unresolved issue. This paper presents the preliminary results of electrocodeposition thin nanocomposite films under different processing conditions. The microstructure and distribution of Al2O3 nanoparticles in electrocodeposited Cu matrix nanocomposite thin films on a pure Al plate were examined. In addition, the effect of electrolyte concentration on the agglomeration of nanoparticles was studied. Different stirring times were used for electrodepositing the alumina/Cu nanocomposite and the pure Cu control film. Under the constant stirring condition, different deposition times including 1, 4, 8, 12, and 24 hours were taken to study the differences between the agglomeration states of the alumina nanoparticles with the time change. We also examined the effect of turning the electromagnetic stirrer ON and OFF at different time intervals from as short as every 20 minutes to as long as ON and OFF every 2 hours on the nanoparticle agglomeration in the film Optical and electron microscopic studies were made to reveal the microstructure of the nanocomposite. It is found that there is no significant difference in microstructures for the specimens that made under either intermittent stirring or constant stirring for the same length of time.

Preparation of Nano-Laminated Composite by Electrophoretic Deposition

Polyacrylamide-clay Nacre-Like Nanocomposites Prepared by Electrophoretic Deposition

Preparation of Acrylic Anodic Electrophoretic Resin/clay Nanocomposite Films by Water-Based Electrodeposition

Preparation and Characterization of Polymer-Clay Nanocomposite Films

Fabrication of Nano-Structural Ceramic Composite Coatings Usmg Electrophoretic Deposition and Reaction Bonding Process

Electrophoretic Deposition of Polymer and Composite Films

Preparation of polyacrylamide/montmorillonite nacre like nanocomposites

Influence of Carbon Nanotube Coatings on Carbon Fiber by Ultrasonically Assisted Electrophoretic Deposition on Its Composite Interfacial Property.

Electrophoretic deposition of cellulose nanocrystals (CNs) and CNs/alginate nanocomposite coatings and free standing membranes.

Electrophoretic deposition and its application in ceramics processing

A Comprehensive Investigation on the Electrophoretic Deposition (EPD) of Nano-Al/Ni Energetic Composite Coatings for the Combustion Application

Special assembly of laminated nanocomposite that mimics nacre

Nanoparticle Reinforced Metal Composites Prepared by Electrocodeposition

A Facile Approach to Prepare Self-Assembled, Nacre-Inspired Clay/Polymer Nano-Composites

Preparation of Highly Exfoliated Epoxy/clay Nanocomposites by "slurry Compounding": Process and Mechanisms.

Electrophoretic Deposition of Carbon Nanotubes: Recent Progress and Remaining Challenges

Nanoclay-reinforced Polyacrylamide Composite: Synthesis, Structural and Mechanical Characterization

Poly(amic Acid)–clay Nacrelike Composites Prepared by Electrophoretic Deposition

Electrophoretic deposition of HA/MWNTs composite coating for biomaterial applications

Preparation, Morphology and Thermal/mechanical Properties of Epoxy/nanoclay Composite

The preparation of laminated ceramic composites by sedimentation and sieving