Abstract:This research explored effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures of fly ash (FA) and ground granulated blast furnace slag powder (SL). The two types of C55 strength grade concretes (one is pure cement concrete, another one is concrete, replacing part of cement with 12% FA and 18% SL) were prepared and their compressive strength, chloride diffuse on coefficient and carbonation depth under the standard and steam curing conditions were measured and compared. The phase composition and microstructure of the concretes under the two curing conditions were tested by X-ray diffraction (XRD), scanning electron microscope (SEM) and mercury intrusion porosimeter (MIP). The results show that, on the one hand, compared with standard curing, steam curing is beneficial to the early strength, but not conducive to the later strength development and chloride permeability resistance of both two types of concretes. Furthermore, for the steam cured concrete, the 28d carbonation depth of the forming surface is higher than that of the bottom surface. What's more, steam curing can reduce the carbonization resistance of pure cement concrete and improve the carbonization resistance of concrete mixed with FA and SL. On the other hand, composite mineral admixtures of FA and SL reduce the early strength, the carbonization resistance of concrete cured with standard curing, but improve the later strength, the carbonization resistance and chloride permeability resistance of concrete cured with steam curing. FA and SL are thermally activated under steam curing and can react with the calcium hydroxide formed by cement hydration in the early stage, which produces larger amount of secondary hydration products to improve the pore structure and interfacial microstructure of the concrete with FA and SL. Thus, the adverse effects of steam curing on later strength and durability of concrete are significantly restrained by composite mineral admixtures of FA and SL.

Effect of Fly Ash and Activator on Performance of Steam-Cured Concrete

Study on the Effect of Fly Ash and Polycarboxylic Acid Water Reducer on the Properties of Recycled Concrete

Investigating the Impact of Fly Ash on the Strength and Micro-Structure of Concrete during Steam Curing and Subsequent Stages

Effect of Forepart Strength of Cured-concrete

Effect of steam curing on strength, durability and microstructure of concretes with and without mineral admixtures

Effect of Curing Regime on the Mechanical Properties and Durability of Steam Cured-Concrete

Influence of Calcined Flue Gas Desulfurization Gypsum and Calcium Aluminate on the Strength and AFt Evolution of Fly Ash Blended Concrete under Steam Curing

Strength and Microstructural Characteristics of Activated Fly Ash–Cement Paste

Experimental Research on the Using of FJ1-activator in High Strength Concrete with High Content of Fly Ash

Effect of Curing Conditions on Property of High Performance Concrete with Composite Mineral Admixture

Influence of Steam Curing Method on the Performance of Concrete Containing a Large Portion of Mineral Admixtures

Effect of steam curing system on compressive strength of recycled aggregate concrete

Strength characteristics of self-compacting concrete with alkali-activated fly ash

Influence of High-Volume Mineral Mixtures and the Steam-Curing Temperatures on the Properties of Precast Concrete

Effects of different curing regimes on the compressive strength properties of self compacting concrete incorporating fly ash and silica fume

Compressive Strength Development of High-Volume Fly Ash Ultra-High-Performance Concrete under Heat Curing Condition with Time

Experimental study on the compressive strength and shrinkage of concrete containing fly ash and ground granulated blast‐furnace slag

Effect of fly ash on shrinkage of self-compacting concrete using restrained ring test

The Effect of Mechanical Activation of Fly Ash on Cement-Based Materials Hydration and Hardened State Properties

Modeling of Effect of Fly Ash Amount on Microstructure and Chloride Diffusivity of Blended Fly Ash-Cement Systems

Prediction of compressive strength development for blended cement mortar considering fly ash fineness and replacement ratio