Abstract:Over the past several decades, planar proton exchange membrane fuel cells (PEMFCs) received considerable attention due to their simple structure, manufacturing, and easy integration. However, current PEMFC electrode designs are disadvantaged by high cost, insufficient mass transport, nonuniform reactant, current and temperature distribution, and limited water removal. The development of a novel tubular fuel cell design could address these challenges. Tubular-shaped PEMFC offers several advantages over planar one, including lower pressure drop, efficient water removal, reduced mass transport losses, and cost reduction owing to removing one of gas diffusion layer/bipolar plate (GDL/BPP) side. This work developed a carbon nanofiber (CNF)/Pt-based cathode for a tubular fuel cell. The tubular CNF support for Pt catalyst was fabricated employing the electrospinning method. Polyacrylonitrile (PAN) was used as the precursor. The electroless deposition of Pt using the chloroplatinic acid solutions was applied to produce well-dispersed low Pt loading nanowires. The tubular CNF/Pt electrodes were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), ex-situ cyclic voltammetry to determine the CF and Pt morphology and feasibility of the prepared layer in PEMFC application. SEM images indicated that increasing the Pt precursor concentration in the plating bath leads to higher Pt loading and larger Pt clusters on the CNF surface. The calculated electrochemical active surface area (ECSA) trend imparts that high Pt loading is less favorable as thick Pt layers lead to low Pt utilization and increased material costs. ECSA results agreed with SEM images, suggesting that the medium Pt concentration (1.5 g L -1 Pt precursor) developed a homogenous Pt distribution and comparable Pt surface area of 24 m 2 g Pt -1 for the Pt loading of 0.046 mg cm -2 , proving the feasibility of the proposed process.

Fabrication of Support Tubular Proton Exchange Membrane For Fuel Cell

Hybrid Proton Exchange Membranes Based on Sulfonated Poly(Phthalazinone Ether Ketone) and Zirconium Hydrogen Phosphate

Mechanically Robust and Highly Methanol-Resistant Sulfonated Poly(ether Ether Ketone)/poly(vinylidene Fluoride) Nanofiber Composite Membranes for Direct Methanol Fuel Cells

Fabrication and Performance Evaluation of Tubular Catalyst Layer for Proton Exchange Membrane Fuel Cell

Modification of sulfonated poly (etherether ketone) composite polymer electrolyte membranes with 2D molybdenum disulfide nanosheet-coated carbon nanotubes for direct methanol fuel cell application

Preparation of an Integrated Membrane Electrode Assembly for Proton Exchange Membrane Fuel Cells Using a Novel Wet-Bonding Strategy

High ion exchange capacity perfluorosulfonic acid resine proton exchange membrane for high temperature applications in polymer electrolyte fuel cells

Fabrication of high performance high-temperature proton exchange membranes through constructing stable cation-rich domain in polybenzimidazole membrane

The Performance Improvement of Membrane and Electrode Assembly in Open-Cathode Proton Exchange Membrane Fuel Cell

Novel Proton Exchange Membranes Based on Sulfonated-Phosphonated Poly (P-Phenylene-co-aryl Ether Ketone) Terpolymers with Microblock Structures for Passive Direct Methanol Fuel Cells

Ionically Crosslinked Composite Membranes from Polybenzimidazole and Sulfonated Poly (fluorenyl ether ketone) for High-Temperature PEM Fuel Cells

Silica-facilitated Proton Transfer for High-Temperature Protonexchange Membrane Fuel Cells

A Robust Composite Proton Exchange Membrane of Sulfonated Poly (Fluorenyl Ether Ketone) with an Electrospun Polyimide Mat for Direct Methanol Fuel Cells Application

Advanced Materials and Fabricating Approaches for Proton Exchange Membrane Fuel Cells

The fabrication of integrated proton exchange membrane fuel cells: Excellent mechanical strength and electrochemical performance

Development of a High-Performance Proton Exchange Membrane:From Structural Optimization to Quantity Production

Pt/C Modified Proton Exchange Membrane for Improved Fuel Cell Performance

Silica-facilitated proton transfer for high-temperature proton-exchange membrane fuel cells

Advancements in proton exchange membranes for high-performance high-temperature proton exchange membrane fuel cells (HT-PEMFC)

A Simple Self-Cross-Linking Strategy for Double-Layered Proton Exchange Membranes with Improved Methanol Resistance and Good Electrochemical Properties for Passive Direct Methanol Fuel Cells

Nanostructured Ultrathin Catalyst Layer Based on Open-Walled Ptco Bimetallic Nanotube Arrays for Proton Exchange Membrane Fuel Cells