Abstract:Damage and failure in quasi-brittle materials such as rocks, concrete, and ceramics, have a complex non-linear behavior due to their heterogeneous character and the development of a fracture process zone (FPZ), formed by micro-cracking around the tip of an induced or pre-existing flaw. A softening behavior is observed in the FPZ, and the linear elastic fracture mechanic (LEFM) cannot correctly reproduce the stress field ahead of the crack tip. The existence of the FPZ may be the intrinsic cause of the size effect. An appropriate modeling of this process zone is mandatory to reproduce accurately the failure propagation and consequently, the structural behavior. Different from most of the domain numerical techniques, the boundary element method (BEM) requires (besides the boundary division into elements) only the discretization of a small region where dissipative effects occur. Cells with embedded continuum strong discontinuity approach (CSDA), placed in the region where the crack is supposed to occur, are capable of capturing the transition of regimes in the failure zone. Numerical bifurcation analysis, based on the singularity of the localization tensor, is used to determine the end of the continuum regime. Weak and strong discontinuity regimes are associated with diffuse micro-cracks (strain discontinuity) and macro-crack (displacement discontinuity). A variable bandwidth model is used during the weak discontinuity regime to represent the advance of micro-cracks density and their coalescence. Continuum and discrete cohesive isotropic damage models are used to describe the softening behavior. Analysis of three-dimensional problems with single crack in standard and mixed fracture modes, using this transitional approach and the BEM cells is firstly presented in this work. Experimental reference results are used to attest the capability of the approach in reproducing the structural behavior during crack propagation. Some necessary advances required for its applications for general complex structural problems are pointed out.

A Hybrid Procedure Of Distinct - Boundary Element For Discrete Rock Dynamic Analysis

Vertical Dynamic Analysis of a Rigid Disk Embedded in Layered Saturated Soils with Compressible Fluid

Application of Distinct Element Method in Dynamic Analysis of High Rock Slopes and Blocky Structures

Three dimensional distinct element numerical model for static and dynamic analysis of rock bodies

An Adaptive Scaled Boundary Finite Element Method by Subdividing Subdomains for Elastodynamic Problems

Determining Digital Representation and Representative Elementary Volume Size of Broken Rock Mass Using the Discrete Fracture Network–Discrete Element Method Coupling Technique

DEM–FEM Analysis of Soil Failure Process Via the Separate Edge Coupling Method

Infinite Boundary Elements for Dynamic Problems of 3‐D Half Space

A Contact Rheological Model Embedded in Distinct Element Method

Analysis Of The Dynamic Mechanical Behavior Of Soil Body Through Particle Motion By Distinct Element Method

A scaled boundary finite element method for soil dynamic impedance of pile groups using hybrid quadtree mesh considering horizontal vibration

A three-dimensional hybrid finite element -- spectral boundary integral method for modeling earthquakes in complex unbounded domains

A hybrid artificial boundary combining perfectly matched layer and infinite elements for analysing semi-infinite problems

Boundary element method: cells with embedded discontinuity modeling the fracture process zone in 3D failure analysis

A Coupling FEM/BEM Method with Linear Continuous Elements for Acoustic-Structural Interaction Problems

A Chain Approach of Boundary Element Row-Subdomains for Simulating the Failure Processes in Heterogeneous Brittle Materials

Research status of distinct element method particle flow analysis method and its application in deep sea core drilling

Aca-Accelerated Time Domain Bem for Dynamic Analysis of Htr-Pm Nuclear Island Foundation

RESEARCH ON DISTRJBUTED COHESIVE ELEMENT METHOD

Discontinuous Boundary Elements for Steady-State Fluid Flow Problems in Discrete Fracture Networks

SH Wave Scattering from 2-D Fractures Using Boundary Element Method with Linear Slip Boundary Condition