Abstract:A series of mesoporous molecular sieve samples have been synthesized hydrothermally by using cetyltrimethylammonium bromide (CTAB) as a template, tetraethyl orthosilicate (TEOS) as a silica source, tetramethyl ammonium hydroxide as a base source and water as a solvent. The samples were prepared by adding required amount of surfactant, TEOS, water and TMAOH to maintain pH, then the obtained mixture was stirred for 10 min. and then transferred into autoclave. pH of the gel was adjusted to 10. The molar ratio of surfactant (CTAB) and TEOS was kept at 0.11:0.48, 0.165:0.48, 0.22:0.48 and 0.274:0.48 for samples A-I, A-II, A-III and A-IV respectively, while the aging time was kept 4 days and temperature remained constant at 393 K. The as-synthesized samples were thoroughly washed with distilled water and then dried at 373 K for 24 h. The as-synthesized samples were calcined at 723 K for 6 h in air. The as synthesized samples were characterized for its morphology using Field Emission Scanning Electron Microscopy (FESEM), elemental analysis by using Energy Dispersive X-Ray (EDX), thermal stability by using Thermogravimetric Analysis (TGA), the functional groups within the samples before and after calcination was analyzed using Fourier Transform Infrared Spectroscopy (FTIR). Formation of the mesoporous material depends on the surfactant, which act as a structure directing agent. Micelles of the surfactant arrange themselves and interact with the silicate ions to form the mesoporous material. In this study, the effect of concentration was studied on the synthesis and found that due to increase in concentration of surfactant, more silica polymerized and formation of material increases.

Effect of Surfactant on the Physical Properties of Hierarchically Macro–Mesoporous Metal Oxides

Preparation and characterization of titania-alumina mixed oxides with hierarchically macro-/mesoporous structures

Surfactant Effect on Controllable Phase Transformation and UV-shielding Performance of Titanium Dioxide

Catanionic-surfactant templated synthesis of organized mesoporous γ-alumina by double hydrolysis method

Catanionic-Surfactant Templated Synthesis Of Organized Mesoporous Gamma-Alumina By Double Hydrolysis Method

Effect of Surfactants on the Morphology and Photocatocatalytic Properties of ZnO Nanostructures

Effect of Surfactant Concentration on the Physico-chemical Characteristics of Mesoporous Molecular Sieve

PEO-surfactant Assisted Alcothermal or Hydrothermal Synthesis of Hierarchically Mesoporous Titania Materials

Influence of the surfactant on structural characterizations and molecular adsorption properties of surfactant-templated NaY zeolite

Preparation and Characterization of Hierarchically Microstructured Molybdenum Oxides with Surfactants-assisted Solvothermal Method

A surfactant-directed sol-gel evolution in the formation of hierarchical zeolite beta

Interfacial Behavior And Micellization Of Binary Surfactant Mixtures In The Concentrated Sodium Aluminate Solution

Synthesis and structural properties of hierarchically structured aluminosilicates with zeolite y (FAU) frameworks

Influence of Surfactant on Performance of CeZrYO Oxygen Storage Material

Synthesis and Characterization of Surface-modified Nanocrystalline Anatase Titania with Different Morphologies

Synthesis, Characterization and Catalytic Applications of Mesoporous Γ-Alumina from Boehmite Sol

Porous nanostructured metal oxides synthesized through atomic layer deposition on a carbonaceous template followed by calcination

Generalized Syntheses of Large-Pore Mesoporous Metal Oxides with Semicrystalline Frameworks

Surfactant‐Free Synthesis of Crystalline Mesoporous Metal Oxides by a Seeds/ NaCl‐Mediated Growth Strategy

Effect of cationic surfactants on structure and morphology of mesostructured MOFs

Influence of Surfactants on Microstructure and Properties of MAO Coated on Aluminum Alloy in Marine Construction