Abstract:Publication date: 27 August 2021 Source: Materials Science Forum Vol. 1044 Author(s): Iman Rahayu, Ulima A Suci, Fahmi Taufiqulhadi Lithium iron phosphate (LiFePO4) based material is one of the most prospective candidates as a cathode material in lithium-ion batteries because of its lower cost, safer, and environmental benignity compared to lithium cobalt oxide (LiCoO2), which is commonly used for lithium-ion batteries manufacturing. However, its low conductivity is the obstacle of this material to solve, so that modification with the addition of silicon (Si) is expected to improve the electrochemical performance. Meanwhile, solid state reaction is considered simple and effective in LiFePO4 crystal growth process. Therefore, Si-doped LiFePO4 using solid state reaction in this research aims to study its structure and morphology as well as the effect of adding Si to its conductivity. The synthesis began with mixing LiH2PO4, Fe2O3, carbon black, and six-mole ratio variation of Si to LiFePO4 using agate with ethanol: acetone addition then dried in an oven at 80°C and heated at 550°C in a furnace for 6 hours under argon atmosphere and sintering temperature of 870°C for 16 hours with the same condition. The sample of 3% mole ratio performed the highest conductivity of all variations with 3.01 x 10-6 S.cm-1, and was identified as Li0.93Fe1.07P0.93O4Si0.7 with orthorhombic structure, Pnma space group (Ref. Code: ICSD 98-016-1792) with the highest peak at 2θ = 35.556° from XRD analysis with rectangular-like shape particle.

Fine-Particle Lithium Iron Phosho-Olivine Synthesized by a Novel Modified Solid-State Reaction

A simple, cheap soft synthesis routine for LiFePO4 using iron(III) raw material

High‐Rate LiFePO4 Electrode Material Synthesized by a Novel Route from FePO4 · 4H2O

A synthesis route for lithium iron phosphate prepared by improved coprecipitation

A Promising Solid‐State Synthesis of LiMn 1‐ y Fe y PO 4 Cathode for Lithium‐ion Batteries

LiFePO4 Cathode Materials with Enhanced Performance Prepared by a Novel Solid-State Method

Characteristics of Li0.98Cu0.01FePO4 prepared from improved co-precipitation

Synthesis of LiFePO4/C Composite Cathode Materials by Solid State Method Using Mixed Iron Sources

Controllable Synthesis of Regular Lifepo4 Particles Via Solvothermal Reaction

Engineering Manganese-Rich Phospho-Olivine Cathode Materials with Exposed Crystal {0 1 0} Facets for Practical Li-ion Batteries

Synthesis and Characterization of LiFePO4 by a New Synthetic Route

Preparation of LiFePO4 with inverse opal structure and its satisfactory electrochemical properties

Improvement of Electrochemical Performance of LiFePO4 Cathode Materials for Lithium-Ion Battery

Engineering Manganese-rich Phospho-olivine Cathode Materials with Exposed Crystal (010) Facets for Practical Li-ion Batteries

A versatile method for preparing FePO4 and study on its electrode performance in lithium ion batteries

Synthesises, Characterizations and Electrochemical Properties of Spherical-Like LiFePO4 by Hydrothermal Method

Modification of Cathode Material Lithium Iron Phosphate by Silicon Doping Using Solid State Reaction

Preparation and characterization of nanoscale LiFePO 4 cathode materials by a two-step solid-state reaction method

Synthesis of LiFePO4/C Composite As a Cathode Material for Lithium-Ion Battery by a Novel Two-Step Method

Preparation and Characterization of Nano-Sized LiFePO4 by Low Heating Solid-State Coordination Method and Microwave Heating

Synthesis of LiFePO4/C composite electrode with enhanced electrochemical performance