Abstract:Instability evolution in a transitional hypersonic boundary layer and its effects on aerodynamic heating are investigated over a 260 mm long flared cone. Experiments are conducted in a Mach 6 wind tunnel using Rayleigh-scattering flow visualization, fast-response pressure sensors, fluorescent temperature-sensitive paint (TSP) and particle image velocimetry (PIV). Calculations are also performed based on both the parabolized stability equations (PSE) and direct numerical simulations (DNS). Four unit Reynolds numbers are studied, 5.4, 7.6, 9.7 and$11.7\times 10^{6}~\text{m}^{-1}$. It is found that there exist two peaks of surface-temperature rise along the streamwise direction of the model. The first one (denoted as HS) is at the region where the second-mode instability reaches its maximum value. The second one (denoted as HT) is at the region where the transition is completed. Increasing the unit Reynolds number promotes the second-mode dissipation but increases the strength of local aerodynamic heating at HS. Furthermore, the heat generation rates induced by the dilatation and shear processes (respectively denoted as$w_{\unicode[STIX]{x1D703}}$and$w_{\unicode[STIX]{x1D714}}$) were investigated. The former item includes both the pressure work$w_{\unicode[STIX]{x1D703}1}$and dilatational viscous dissipation$w_{\unicode[STIX]{x1D703}2}$. The aerodynamic heating in HS mainly arose from the high-frequency compression and expansion of fluid accompanying the second mode. The dilatation heating, especially$w_{\unicode[STIX]{x1D703}1}$, was more than five times its shear counterpart. In a limited region, the underestimated$w_{\unicode[STIX]{x1D703}2}$was also larger than$w_{\unicode[STIX]{x1D714}}$. As the second-mode waves decay downstream, the low-frequency waves continue to grow, with the consequent shear-induced heating increasing. The latter brings about a second, weaker growth of surface-temperature HT. A theoretical analysis is provided to interpret the temperature distribution resulting from the aerodynamic heating.

Flow Patterns and Thermal Drag in Supersonic Duct Flow with Heating

Experimental Study of Pressure Drop-Flow Rate Characteristics of Heated Tight Porous Materials

Thermal Drag in Forced Duct Flows

Study of Pressure Drop-Flow Rate and Flow Resistance Characteristics of Heated Porous Materials under Local Thermal Non-Equilibrium Conditions

Saturated Flow Boiling Heat Transfer of R1233zd(E) in Parallel Mini-Channels: Experimental Study and Flow-Pattern-based Prediction

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

LAMINAR FLOW AND HEAT TRANSFER IN THE DEVELOPING REGION OF HELICAL SQUARE DUCTS

Newly Identified Principle for Aerodynamic Heating in Hypersonic Flows

Mechanism study on drag reduction and thermal protection for the porous opposing jet in hypersonic flow

Aerodynamic Heating in Hypersonic Boundary Layers:\ Role of Dilatational Waves

Aerodynamic Heating in Hypersonic Boundary Layer: Role of Dilatational Waves

Effects of Temperature on Drag Reduction in a Subsonic Turbulent Boundary Layer Via Micro-Blowing Array

Fluid Flow and Convective Heat Transfer in a Rotating Helical Square Duct

Thermal effect on the recirculation zone in sudden-expansion gas flows

Aerodynamics Analysis of Superheated Steam Flow Through Multi-Stage Perforated Plates

Study on Flow Characteristics of Helium

The use of patterned heating in controlling pressure losses within sloping channels

Assessment on jet direction effect on drag and heat reduction efficiency for hypersonic vehicles

Compressible single-phase flows in heated and cooled ducts

Flow regime analysis of high-pressure transcritical fluids in microducts

Predictions of Heat Transfer Coefficients and Pressure Drops to Supercritical Pressure Hcfc22 Flowing in A Small Tube