Application of Response Surface Methodology(RSM) to Optimize the Preparation Conditions of PDMS/PVDF Composite Membranes
FAN Cheng,ZHAN Xia,CHEN Jian,PAN Fu-sheng,QIN Lin,WANG Tao,LI Ji-ding
DOI: https://doi.org/10.3969/j.issn.1003-9015.2012.03.003
2012-01-01
Abstract:The response surface methodology(RSM) was used to optimize the preparation conditions of PDMS/PVDF composite membranes for pervaporation.The effects of four variables including silicone rubber concentration,mass ratio of RTV B to RTV A,cross-linking temperature and time on the membrane performances were investigated.The regression equations between the preparation variables and the performances of the composite membranes were established,and the main effects,quadratic effects and the effects of interactions of the four variables on the separation factor and permeation flux of the composite membranes were studied.It was found that the silicone rubber concentration affects the selectivity and permeation flux of the composite membranes prepared most significantly,while the cross-linking time has almost no effect on the selectivity.According to the optimization analysis of the proposed regressing equation,it was found that,at 40℃ and ethanol concentration of 10%(wt) and when the silicone concentration is 93%(wt),the mass ratio of RTV B to RTV A is 0.08,cross-linking temperature is 100℃ and cross-linking time is 13.83 h,the prepared PDMS/PVDF composite membrane will have the optimum performances of selectivity of 9.47,total flux of 77.57 g(m2·h)-1 and the ethanol concentration of the permeate side is 51.3%.The experimental results are in good agreement with those predicated by the proposed regression equation,which indicates that the proposed regression equation could be used to forecast and optimize the pervaporation performance of the PDMS/PVDF composite membrane to be prepared.