Abstract:The presence of cyclic organic compounds, including phenol, in the wastewater of many industries has made phenol removal an important issue. Meanwhile, the biological methods of removing phenol have attracted the attention of researchers in recent years. Recently, the use of immobilized microbial cells is proposed as a new approach in industrial wastewater treatment. In this research, the aim is to study the effect of immobilized beads size on the phenol biodegradation efficiency and specific microbial growth rate. For this purpose, electrospray technique was used to immobilize activated sludge in hybrid matrix of alginate and polyvinyl alcohol (PVA). The fabricated alginate/PVA beads were characterized using Fourier transform infrared spectroscopy (FTIR). Evaluation of the results related to the free and immobilized cell systems in the shake flask experiments showed that at low phenol concentrations the immobilized cell system had the same performance as the free cell system, while the immobilized cell system at higher concentrations had a better performance in removing phenol so that at a concentration of 2000 mg/L, removal percentage has increased from 15% to 25-34%. On the other hand, in this survey, the kinetic behavior of activated sludge was in good agreement with Haldane's equation. Moreover, the maximum specific growth rate was measured 0.033 and 0.041 (h-1) beside 544 and 636 mg/L substrate inhibition constant, for free and immobilized cell systems, respectively. This result shows that the phenol biodegradation has been improved by using the cell immobilization technique especially with applying the smaller beads, which is due to improved mass transfer and microbial cell protection from harsh environments.

Modeling for Batch Phenol Biodegradation with Immobilized Alcaligenes Faecalis

Modelling of phenol biodegradation by Candida tropicalis immobilised in alginate gel beads

Modeling of batch phenol biodegradation in internal loop airlift bioreactor with gas recirculation by Candida tropicalis

CFD Modeling of Immobilized Phenol Biodegradation in Three-Phase Airlift Loop Reactor

Modeling of Local Dynamic Behavior of Phenol Degradation in an Internal Loop Airlift Bioreactor by Yeast Candida Tropicalis

Kinetic Modeling Of Growth And Biodegradation Of Phenol And M-Cresol Using Alcaligenes Faecalis

Biodegradation of Phenol at High Initial Concentration by Alcaligenes Faecalis

A First-Order Kinetic Model for Simulating the Aerobic Degradation of Municipal Solid Waste.

CFD Modelling of Phenol Biodegradation by Immobilized Candida Tropicalis in a Gas–liquid–solid Three-Phase Bubble Column

Modeling for Local Dynamic Behaviors of Phenol Biodegradation in Bubble Columns

Internal mass transfer effect on biodegradation of phenol by Ca-alginate immobilized Ralstonia eutropha

Phenol Degradation Performance in Batch and Continuous Reactors with Immobilized Cells of Pseudomonas putida

Mass Transfer Analysis for Terephthalic Acid Biodegradation by Immobilized Pseudomonas Sp. in a Packed-Bed Reactor

Experiments and Modelling of Phenanthrene Biodegradation in the Aqueous Phase by a Mixed Culture.

Study and Comparation of a Kind of Microorganism and Its Immobilized Cells for Phenol Degradation

Substrate Interactions and Kinetics Study of Phenolic Compounds Biodegradation by Pseudomonas Sp. Cbp1-3

Batch-mode degradation of high-strength phenolic pollutants by Pseudomonas aeruginosa strain STV1713 immobilized on single and hybrid matrices

Investigating the effect of electrosprayed alginate/PVA beads size on the microbial growth kinetics: Phenol biodegradation through immobilized activated sludge

Modeling of a Pilot-Scale Trickle Bed Reactor for the Catalytic Oxidation of Phenol

Hydrogel immobilized microalgae-alginate beads to model the fermentation of phenol-containing wastewater into biohydrogen molecules

Transient CFD modeling of toluene waste gas biodegradation in a gas–liquid–solid three-phase airlift loop reactor by immobilized Pseudomonas putida