Abstract:An airlift biofilm reactor was employed to study phenol biodegradation by Pseudomonas putida. Hydrodynamic tests were also conducted in a conventional column to facilitate the comparison of the dynamic behavior in different types of columns. The three-phase airlift column offered better aeration than the conventional column as liquid and solid circulation in the downcomer favored bubble breakup, increasing oxygen dissolved in the liquid phase and favoring the phenol biodegradation process. Kinetic parameters of phenol biodegradation by P. putida were obtained in an agitated batch reactor, with the initial phenol concentration varying from 10 to 750 mg/L. Experimental data were fitted using different microbial growth models found in literature. The Yano and Koga model, which considers the formation of multiple inactive enzyme–substrate complexes, fitted well with our experimental data, with a correlation coefficient, R2 = 0.952. An internal loop airlift bioreactor was used for aerobic phenol biodegradation in which polystyrene particles were utilized to support biomass immobilization. Several tests were performed by varying the influent phenol concentration, hydraulic retention time, upstream flow, and superficial air velocity. It was concluded that until an influent phenol concentration of approximately 300 mg/L, phenol acted as the limiting substrate. For higher phenol concentrations, oxygen became the limiting substrate. An increase in the oxygen concentration resulted in the complete consumption of phenol under high phenol concentration of 500 mg/L.

CFD Modeling of Immobilized Phenol Biodegradation in Three-Phase Airlift Loop Reactor

CFD Modelling of Phenol Biodegradation by Immobilized Candida Tropicalis in a Gas–liquid–solid Three-Phase Bubble Column

Modeling of batch phenol biodegradation in internal loop airlift bioreactor with gas recirculation by Candida tropicalis

Modeling of Local Dynamic Behavior of Phenol Degradation in an Internal Loop Airlift Bioreactor by Yeast Candida Tropicalis

Transient CFD modeling of toluene waste gas biodegradation in a gas–liquid–solid three-phase airlift loop reactor by immobilized Pseudomonas putida

CFD Simulation for Up Flow Jet-Loop Reactors by Use of Bi-Dispersed Bubble Model

Experimental and Numerical Simulation on Sequential Three Phase Jet-Loop Reactor

Transient modeling of toluene waste gas biotreatment in a gas–liquid airlift loop reactor

Modeling for Local Dynamic Behaviors of Phenol Biodegradation in Bubble Columns

Modeling for Batch Phenol Biodegradation with Immobilized Alcaligenes Faecalis

Modelling of phenol biodegradation by Candida tropicalis immobilised in alginate gel beads

Modeling of a Pilot-Scale Trickle Bed Reactor for the Catalytic Oxidation of Phenol

Local hydrodynamics modeling of a gas-liquid-solid three-phase airlift loop reactor

Cfd Modelling of Transient Performance of Toluene Emissions Biodegradation in Bubble Column

Multiphase flow characteristics of a novel internal-loop airlift reactor

Integrated Anaerobic/aerobic Biodegradation in an Internal Airlift Loop Reactor for Phenol Wastewater Treatment

Computer assisted design and flow field analysis of a multi-tube airlift reactor for biological treatment of oily wastewater

Characteristics of three-phase internal loop airlift bioreactors with complete gas recirculation for non-Newtonian fluids

Computational fluid dynamics modeling of carbon dioxide capture from air using biocatalyst in an airlift reactor

Phenol Biodegradation by Pseudomonas putida in an Airlift Reactor: Assessment of Kinetic, Hydrodynamic, and Mass Transfer Parameters

Modelling of gas-liquid-solid distribution in the cocurrent three-phase moving bed