Abstract:The dynamics of laser ablation of solid target with ultrashort intense laser pulses is not only fundamentally interesting, but also relevant to a few important applications such as microfabrication, laser propulsion, laser induced breakdown spectroscopy, etc. By use of time-resolved pump-probe shadowgraphic imaging technology, we study the dynamic process of laser ablation of a planar aluminum target in air. The incident laser pulses are from a Ti: sapphire femtosecond laser amplifier system with a duration of 50 fs, central wavelength of 800 nm, pulse energy varying between 4 mJ and 7 mJ. Time-resolved shadowgraphs of material ejection from the aluminum target are recorded at the time delay up to a few nanoseconds after laser irradiation. By changing the distance between the target and the focal point of the incident laser, we obtain the shadowgraphs of the target ejection under different laser spot sizes. When the laser spot size is relatively large say, over 1 mm, the irradiated target surface is ablated in the form of a planar shock. However, when the laser spot size is relatively small, the ejection appears in the form of a hemispherical blast wave. It is found that the hemispherical blast wave well conforms to the Sedov's blast wave theory. When the laser energy is relatively large, it is found that ionization of air has a great effect on laser ablation. Additional small ejections appear as columnar and hemispherical structures near the laser axis, which are superimposed on the large planar shock. These can be attributed to the following processes. Firstly, as the ionization of air occurs near the laser axis, effective heat transfer from air plasma to the aluminium target leads to enhanced target temperature. This leads to the formation of a columnar structure on a picosecond time scale. Secondly, the columnar ejection and air plasma expansion near the laser axis result in the decrease of air density and pressure, which leads to the formation of the hemispherical structure on a nanosecond time scale.

Laser ablation of copper and aluminium in air

Laser Ablation of Si, Ge, Zro2 and Cu in Air

Numerical and Experimental Investigation on Pulsed Nanosecond Laser Ablation Processing of Aluminum Alloy

Ablation of Metallic Targets by High-Intensity Ultrashort Laser Pulses

Femtosecond Laser Ablation of Al-Mg Alloy in Vacuum and Air

Ablation of Copper by a Single Ultrashort Laser Pulse

Experimental and numerical simulation analysis of laser paint removal of aluminum alloy

Investigation of the Particle Size Distribution of the Ejected Material Generated During the Single Femtosecond Laser Pulse Ablation of Aluminium

Laser ablation of Ti-Al alloy in vacuum and air environments

Femtosecond Laser Ablation of an Aluminum Target in Air

Study of Ultrashort Laser Ablation of Metals by Molecular Dynamics Simulation and Experimental Method

Si and Cu Ablation with a 469-Nm Laser Focused by a Toroidal Mirror

Nd: YAG Laser Ablation of Aluminum Alloy 6061 Before and after Silicon Dioxide Coating

Research on the ablation property of aluminum plate irradiated by quasi-continuous-wave laser and continuous-wave laser

Study of Nanosecond Laser Ablation on Aluminum and Stainless Steel Targets

Numerical simulation study of ultraviolet nanosecond laser ablation of Cu-Al2O3 dispersion strengthened alloys

Surface ablation and threshold determination of AlCu4SiMg aluminum alloy in picosecond pulsed laser micromachining

&Lt;title>ultrashort Laser Ablation of Metals</title>

XeF Excimer Laser Ablation of Metallic Targets Probed by Energy-Selective Time-of-flight Mass Spectrometry

Mechanism of Ablation in Short-Pulse Laser-Copper Target Interaction

Effects of Laser Irradiation in High-Speed Gas Flow for Surface Treatments of Copper