Abstract:Owing to their excellent mechanical and tribological properties, like the well-known extreme hardness, low coefficient of friction and high chemical inertness, chemical vapor deposition (CVD) diamond films have found applications as a hard coating for drawing dies. The surface roughness of the diamond films is one of the most important attributes to the drawing dies. In this paper, the effects of different surface roughnesses on the friction properties of diamond films have been experimentally studied. Diamond films were fabricated using hot filament CVD. The WC-Co (Co 6[Formula: see text]wt.%) drawing dies were used as substrates. A gas mixture of acetone and hydrogen gas was used as the feedstock gas. The CVD diamond films were polished using mechanical polishing. Polished diamond films with three different surface roughnesses, as well as the unpolished diamond film, were fabricated in order to study the tribological performance between the CVD diamond films and different metals with oil lubrication. The unpolished and polished CVD diamond films are characterized with scanning electron microscope (SEM), atomic force microscope (AFM), surface profilometer, Raman spectrum and X-ray diffraction (XRD). The friction examinations were carried out by using a ball-on-plate type reciprocating friction tester. Low carbide steel, stainless steel, copper and aluminum materials were used as counterpart balls. Based on this study, the results presented the friction coefficients between the polished CVD films and different metals. The friction tests demonstrate that the smooth surface finish of CVD diamond films is beneficial for reducing their friction coefficients. The diamond films exhibit low friction coefficients when slid against the stainless steel balls and low carbide steel ball, lower than that slid against copper ball and aluminum ball, attributed to the higher ductility of copper and aluminum causing larger amount of wear debris adhering to the sliding interface and higher adhesive strength between the contacting surfaces.

The Effect of Surface Morphology on the Friction Behavior of HF-CVD Diamond Films

Effect of Surface Morphology on the Frictional Behaviour of Hot Filament Chemical Vapour Deposition Diamond Films

Influence of Surface Morphology of Diamond Films on Their Frictional Behaviors in Dry and Water Environments

FRICTION PROPERTIES OF POLISHED CVD DIAMOND FILMS SLIDING AGAINST DIFFERENT METALS

Study on the Friction Behavior of HFCVD Diamond Films on Silicon Nitride Substrates

Deposition and Tribological Properties of Cvd Diamond/Diamond-Like Carbon Composite Films

Tribological Behavior Between Micro- and Nano-Crystalline Diamond Films under Dry Sliding and Water Lubrication

Experimental and Molecular Dynamics Investigation on Tribological Properties of Nanocrystalline Diamond Films.

Study on tribological behavior and cutting performance of CVD diamond and DLC films on Co-cemented tungsten carbide substrates

Study on Tribological Performance of Fine-Grained Diamond Films

Friction and Wear Performances of Hot Filament Chemical Vapor Deposition Multilayer Diamond Films Coated on Silicon Carbide under Water Lubrication

Studies on the Performance of Diamond Thin Films with Different Tungsten Carbide Substrates

Comparative Study on the Tribological Performance of HFCVD Diamond and DLC Films under Water Lubricating Condition

Friction and Wear Performance of Boron Doped, Undoped Microcrystalline and Fine Grained Composite Diamond Films

Frictional and Wear Behavior of Micro-Crystalline and Nano-Crystalline Diamond Films

Investigation on the Long-Duration Tribological Performance of Bilayered Diamond/Diamond-Like Carbon Films

Tribological Properties of Cvd Diamond Films Against Zirconia Ceramic

Deposition and friction properties of ultra-smooth composite diamond films on Co-cemented tungsten carbide substrates

Tribological and Cutting Behavior of Silicon Nitride Tools Coated with Monolayer- and Multilayer-Microcrystalline Hfcvd Diamond Films

Tribo-Map of CVD Diamond Film Sliding Against Silicon Nitride in Air

Preparation, Characterization and Investigation of Molecular Films Coated on Diamond-Like Carbon Substrate