Abstract:In this work, the thin -walled NiTi alloy was fabricated by dual -wire electron beam freeform fabrication (EBF 3 ) technology. The effects of process parameters on the composition uniformity, martensitic transformation behavior, mechanical and functional properties of the NiTi alloy were further investigated. The results showed that improper beam current, feeding speed and travel speed caused the uneven distribution of Ni and Ti elements in the as -built samples, which led to a large amount of Ti 2 Ni precipitations in the NiTi depositions. And no obvious martensitic phase transition temperature can be detected in the range of - 70 - 130 degrees C. The increase of heat input was beneficial for promoting element mixing. The NiTi alloy with uniform composition was composed of coarse columnar B2 austenite and a small amount of sub -micron Ti 2 Ni phase at room temperature. During heating and cooling process, it exhibited a single reversible martensitic transformation (B2 <-> B19 ' ). The increase of Ni volatilization with the increase of heat input led to an increase of phase transition temperature. The samples showed satisfactory compressive mechanical properties. The compressive strength and elongation of deposited NiTi alloys were higher than 3.1 GPa and 37 %, respectively. The shape memory recovery rate and superelastic recovery rate of the optimized NiTi alloy were 89.87 % and 83.39 %, respectively. The results provided a valuable reference for low-cost and flexible manufacturing of NiTi alloy structural parts with complex shapes.

Tininb Wide Hysteresis Shape Memory Alloy with Low Niobium Content

Wide Hysteresis Niti(Nb) Shape Memory Alloys with Low Nb Content (4.5 At.%)

Temperature Memory Effect of Ni47Ti44Nb9 Wide Hysteresis Shape Memory Alloy

Shape memory effect of the Ni-Ti-Hf high temperature shape memory alloy

Recent Advances in the Study of the Ti-Ni-Nb Shape Memory Alloy with Wide Hysteresis

Study of the Thermal Physical Properties of Ti47Ni44Nb9 Wide Hysteresis Shape Memory Alloy

Effect of niobium content on shape memory characteristics of (Ni47Ti44)(100-x)Nb-x alloys

Two-Way Shape Memory Effect in A Ti-Ni-Nb Shape Memory Alloy with Wide Hysteresis

Effect of Stoichiometry on Shape Memory Properties of Ti-Ni-Hf-Cu-Nb Shape Memory Alloys Manufactured by Suspended Droplet Alloying

Transformation Hysteresis and Shape Memory Effect of an Ultrafine-Grained Tininb Shape Memory Alloy

Ultra-high temperature shape memory in high-Hf content NiTiHf alloys

Study of Ti-Ni-Nb Shape Memory Alloys with a Wide Hysteresis

Effects of Composition on Transformation Characteristics and Shape Memory Effect of Ti-Ni-Nb Alloys

Martensitic Transformation and Shape Memory Effect of NiCoMnSn High Temperature Shape Memory Alloy

Effects of cooling rate on martensitic transformation behavior and shape memory property for Ni-rich NiTiHf-Nb high-temperature shape memory alloy

Microstructure and Thermoelastic Martensitic Transformation in Ni-Low and -Rich Ni–Ti–Hf–Nb Hightemperature Shape Memory Alloys

Microstructure Evolution and Functional Response of NiTi Shape Memory Alloy Manufactured by Dual-Wire Electron Beam Freeform Fabrication

Martensitic Transformation and Shape Memory Effect of Ti-Ni Based High Temperature Shape Memory Alloys

Effect of Nb-Content on Mechanical Properties of (Ni<sub>47</sub>Ti<sub>44</sub>)<sub>100-x</sub>Nb<sub>x</sub> Shape Memory Alloys

The Effect of Hafnium Content on the Transformation Temperatures of Ni49Ti51-xHfx. Shape Memory Alloys

Deformation Dependence of Transformation Behavior of Ti-Ni-Nb Wide Hysteresis Shape Memory Alloy