Abstract:Remote hybrid testing concept is very promising in conducting large-scale testing for complex structural systems under strong earthquake excitation, in which many components may exhibit severe non-linear behavior. The current Internet is based on hierarchical network infrastructure and ubiquitous deployment of "middleboxes" can be seen on the Internet. So handy and robust data exchange in various network environments is still a challenging task for remote hybrid testing. This paper presents the development of a network communication platform, named NetSLab (Networked Structural Laboratories). The socket-based NetSLab is capable of transferring control and feedback data among remote structural testing laboratories or computers connected by Internet. To keep its simplicity for understanding, developing and maintenance, two new concepts, Dynamic Unified Data Packet (DUDP) and Generalized Data Communication Agency (GDCA), were introduced into NetSLab. A simple method was adopted in NetSLab to provide across firewall/proxy communication, which may greatly facilitate researchers to carry out remote hybrid testing in the current hierarchical network environments. Using NetSLab, a remote hybrid testing application has been developed and trial and actual testes were carried out at the Hunan University. Communication speed tests were performed over various network environments. The results showed that NetSLab was efficient and robust for data exchange in remote hybrid testing.

Ethernet/WLAN Test System and Its Application

REAL-TIME MONITORING SYSTEM FOR THE STATES OF POWER NETWORK OVER ETHERNET AND ATM

Testing Methods of Transmitted Performance about the Local Area Network Based on Ethernet Technology

Real-time Data Transmission of the Digital Simulation System Based on Network

WIDE AREA MEASUREMENT AND REAL-TIME TRANSMISSION SYSTEM FOR PHASOR DATA UNDER NETWORK COMMUNICATION MODE

Study on Real-Time Characteristics of Ethernet in Industrial Application

Lectures on “Industrial Ethernet and Its Application Technology” Chapter Ⅵ The Structure of Distributed Networking Control System Based on EPA

Real-time Capacity Analysis of Ethernet in Industrial Application

The Implementation and Performance Analysis of an Ethernet Embedded System Based on a Microcontroller

EPA-based Open Network Control System

Development and Application of Networked Structural Laboratories System in Current Hierarchical Network Environment

Netslab-based remote hybrid testing in current hierarchical network environment

Network Test System on Linux Platform

A Network Test System Suitable for Enterprise and Institution

Design and Implementation of Distance Laboratory System

Test Methods for High Performance Network Chips

Electrical and Electronic Network Laboratory Based on the Communication Protocol of TCP/IP

A Data Processing and Analysis Testbed for WSNs: Design and Implementation

REAL-TIME COMMUNICATION IN REAL-TIME CONTROL AND ANALYSIS SYSTEM FOR POWER SYSTEMS

Implementation of Network Devices Benchmark RFC2544

Design and Implementation of Wireless Mesh Network Testbed Based on Layer 2 Routing