Abstract:Excessive molybdate (MoO 4 2– ) in drinking water poses a potential hazard to human health. Herein, for the first time, Fe electrocoagulation (EC) was proposed for the removal of Mo(VI) from water. The effects of main aquatic and electrochemical factors on Mo(VI) removal were investigated. Results showed that, among the electrolytes (NaCl, Na 2 SO 4 , and NaNO 3 ), NaNO 3 obviously inhibited the anodic dissolution and Mo(VI) removal, and caused high energy consumption. NaCl was favorable for the reduction of energy consumption whereas its high concentrations inhibited Mo(VI) removal. Via using the response surface method with Box-Behnken design, the optimal process parameters for the maximum Mo(VI) removal were obtained as follows: pH i , 5.5–7.0; CD, 3.5–4.0 A/m2; ED, 0.5–0.9 cm. The analysis of variance demonstrated that initial pH, current density, and electrode distance had highly significant impacts on Mo(VI) removal (p-value < 0.01). The quadratic polynomial model was developed using the Mo(VI) removal efficiency as the response value. The Mo(VI) adsorption experiments demonstrated the effectiveness of adsorption during the Fe EC process. Results of flocs characterization by SEM-EDS, XPS, XRD, and FTIR showed that the main crystalline phases in the flocs included lepidocrocite (γ-FeOOH) and magnetite (Fe 3 O 4 ), and no reduction reactions of Mo(VI) were observed. The mechanisms of Mo(VI) removal mainly involved flocculation, adsorption (electrostatic attraction and inner-sphere complexation), and co-precipitation. Continuous flow tests (172 h) using simulated groundwater showed an average Mo(VI) removal efficiency of 83.4 %. This study indicates that Fe EC is a promising water treatment technology for Mo(VI) removal.

Removal of Humic Acid from Water by Electrocoagulation-Microfiltration

Arsenic Removal in Synthetic Ground Water Using Iron Electrolysis

Role of Humic Acid in Enhancing Dissolved Air Flotation for the Removal of Tio2 Nanoparticles

Removal of Humic Acid Using PEI‐Modified Fungal Biomass

Effect of Humic Acid on the Removal of Chromium(VI) and the Production of Solids in Iron Electrocoagulation.

Landfill Leachate Treatment by Coagulation/flocculation Combined with Microelectrolysis-Fenton Processes

Defluoridation of Drinking Water Using Electrocoagulation-Microfiltration

Enhanced efficiency in HA removal by electrocoagulation through optimizing flocs properties: Role of current density and pH

Fe electrocoagulation technology for effective removal of molybdate from water: Main influencing factors, response surface optimization, and mechanistic analysis

Inhibiting effects of humic acid on iron flocculation hindered As removal by electro-flocculation on air cathode iron anode

Subtle introduction of membrane polarization-catalyzed H2O dissociation actuates highly efficient electrocoagulation for hardness ion removal

The role of interactions between extracellular organic matter and humic substances on coagulation-ultrafiltration process

Highly Efficient Removal of Humic Acid from Aqueous Solutions by Mg/Al Layered Double Hydroxides–fe3o4 Nanocomposites

Simultaneous removal of humic acid and heavy metal from aqueous solutions using charged ultrafiltration membranes

Landfill Leachate Pretreatment by Coagulation–flocculation Process Using Iron-Based Coagulants: Optimization by Response Surface Methodology

Highly Efficient Removal of Perfluorooctanoic Acid from Aqueous Solution by H2O2-enhanced Electrocoagulation-Electroflotation Technique

MF for treatment of iron contaminated underground water and fouling countermeasures

Ultra-high synergetic intensity for humic acid removal by coupling bubble discharge with activated carbon

Modification of Ultrafiltration Membrane with Iron/aluminum Mixed Hydrolyzed Precipitate Layer for Humic Acid Fouling Reduction

Efficient removal of perfluoroalkyl acids (PFAAs) from aqueous solution by electrocoagulation using iron electrode

Removal of Humus in Low Turbidity Water Using Micro-Flocculation Joint Direct Fiber Filtration Process