Abstract:A novel real-time water quality parameter-based coagulant dosing control system is evaluated in full scale treatment plants. Erroneous measurements from real time monitoring equipment may create critical conditions for the coagulant dosing control system. The usage of multiple models which excludes erroneous parameters is evaluated. The need for several model sets even in one treatment plant is discussed to improve dosage predictions when the influent is subject to variable treatment methods and foreign inputs like periodic septic discharge. The robustness and accuracy of the evaluated automated dosing control system can be improved significantly by following these approaches. Introduction Optimizing coagulant dosage in water and wastewater treatment has become more and more critical in order to maintain effluent quality with minimal effect on the environment at minimal cost. The chemical costs of an average wastewater treatment plant (WWTP) represent up to 20% of the operating cost of a treatment plant (Hangouet et al. 2007) It is well documented that optimal dosage has a strong effect on the influent water quality parameters such as turbidity, colour, pH, phosphate, temperature, etc. Also, the wastewater quality changes significantly during a season, a week or a day and time of the day (Sagberg et al. 1990; Buttler et al. 1995). This indicates that coagulant dose would be varying with time according to changes in quality. With the development of cheap and convenient online sensors for water quality measurements, their usage in real-time coagulant dosing control is becoming popular today. Use of flow meters, sometimes together with one or two of these quality parameters, are probably the most common applications in water and wastewater treatment facilities around the world. An investigation into Norwegian water and wastewater treatment plants (WWTP) has reported that 80% of drinking water treatment plants and 83% of wastewater treatment plants control their coagulant dosage either by flow proportional dosage or with pH overrun functions (Ratnaweera 2004). Using more influent parameters would be more efficient to determine the optimal coagulant dose instead of using one or two of them. A novel coagulant dose control system using

Research on Modeling of Dosing Coagulation Process in Water Plant

Research on modeling of the coagulant dosing process of water plant based on BP neural network and mechanism method

Research on identification of dosing coagulation process in water plant based on BP network

Nonlinear Mathematic Model and Simulation on Automatic Control of Dosage in Water Treatment System

Optimal Operation of Residual Chlorine Concentration in Multi-Source Water Distribution System

Modeling and Control of Water Purification Systems

Flocculant Dosage Optimizing in Water Treatment based on Nonlinear Mathematical Model

Dosing Control of Coagulating Sedimentation Process Based on Fuzzy-Neural Networks

Modelling and optimisation of wastewater coagulation process.

[Modeling and Dynamic Simulation of the Multimode Anaerobic/anoxic/aerobic Wastewater Treatment Process].

Study on Application of Model Free Adaptive Controller in Water Plant Dosing Coagulation Process

RBF Network Predictive Control of Coagulant Dosage

Optimization Design for Nutrients Removal Process with Activated Sludge 2D Model

Application of neural network simulator for modeling of water treatment process

Optimizing coagulant dosage using deep learning models with large-scale data

RESEARCH ON MATHEMATICAL MODEL OF OPTIMAL WATER TURBIDITY BEFORE FILTERING FOR CITY WATER SUPPLY SYSTEM

Dynamic Model of Rapid Filtration Processes in a Water Works

Decision Model for Optimization of Coagulation/Flocculation Process for Wastewater Treatment

Optimal design of water-using network based on the time petri net in batch process with single contaminant

The application of MFA controller in dosing coagulation process of water plant

Research On Dynamic Water Level Model Based On Supercharged Boiler