Abstract:A novel real-time water quality parameter-based coagulant dosing control system is evaluated in full scale treatment plants. Erroneous measurements from real time monitoring equipment may create critical conditions for the coagulant dosing control system. The usage of multiple models which excludes erroneous parameters is evaluated. The need for several model sets even in one treatment plant is discussed to improve dosage predictions when the influent is subject to variable treatment methods and foreign inputs like periodic septic discharge. The robustness and accuracy of the evaluated automated dosing control system can be improved significantly by following these approaches. Introduction Optimizing coagulant dosage in water and wastewater treatment has become more and more critical in order to maintain effluent quality with minimal effect on the environment at minimal cost. The chemical costs of an average wastewater treatment plant (WWTP) represent up to 20% of the operating cost of a treatment plant (Hangouet et al. 2007) It is well documented that optimal dosage has a strong effect on the influent water quality parameters such as turbidity, colour, pH, phosphate, temperature, etc. Also, the wastewater quality changes significantly during a season, a week or a day and time of the day (Sagberg et al. 1990; Buttler et al. 1995). This indicates that coagulant dose would be varying with time according to changes in quality. With the development of cheap and convenient online sensors for water quality measurements, their usage in real-time coagulant dosing control is becoming popular today. Use of flow meters, sometimes together with one or two of these quality parameters, are probably the most common applications in water and wastewater treatment facilities around the world. An investigation into Norwegian water and wastewater treatment plants (WWTP) has reported that 80% of drinking water treatment plants and 83% of wastewater treatment plants control their coagulant dosage either by flow proportional dosage or with pH overrun functions (Ratnaweera 2004). Using more influent parameters would be more efficient to determine the optimal coagulant dose instead of using one or two of them. A novel coagulant dose control system using

An Auto-Adjustable and Time-Consistent Model for Determining Coagulant Dosage Based on Operators’ Experience

Machine learning regression-based prediction model for the autonomous control of coagulant dosing in smart water purification plants

Optimal Operation of Residual Chlorine Concentration in Multi-Source Water Distribution System

Joint Majorization of Waterworks and Secondary Chlorination Points Considering the Chloric Odor and Economic Investment in the DWDS Using Machine Learning and Optimization Algorithms.

Modelling and optimisation of wastewater coagulation process.

Optimal scheduling and analysis of booster chlorination in water distribution network based on desired chlorine residual mass concentration

Optimizing coagulant dosage using deep learning models with large-scale data

A Novel Statistical Model for Water Age Estimation in Water Distribution Networks

Machine learning approaches to predict coagulant dosage in water treatment plants

Integrating water quality and streamflow into prediction of chemical dosage in a drinking water treatment plant using machine learning algorithms

Modeling the optimal dosage of coagulants in water treatment plants using various machine learning models

Model-based measurement error detection of a coagulant dosage control system

Prediction of the Optimal Dosage of Poly Aluminum Chloride for Coagulation in Drinking Water Treatment using Artificial Neural Networks

Short-term Prediction of Influent Flow Rate and Ammonia Concentration in Municipal Wastewater Treatment Plants

Modeling and Control of Water Purification Systems

Time series-based machine learning for forecasting multivariate water quality in full-scale drinking water treatment with various reagent dosages

DBFiLM: A novel dual-branch frequency improved legendre memory forecasting model for coagulant dosage determination

Application Of Least-Squares Support Vector Machines For Quantitative Evaluation Of Known Contaminant In Water Distribution System Using Online Water Quality Parameters

Determination of cost-effective optimum coagulant dosage for removal of disinfection by-product precursors in water treatment based on the theory of elasticity

Water plant optimization control system based on machine learning

Integrating Water Quality and Operation into Prediction of Water Production in Drinking Water Treatment Plants by Genetic Algorithm Enhanced Artificial Neural Network.