Abstract:Fuel indirect precooled engines are promising power to realize the vision of greener and faster air transportation. Efficient operation of the engines relies critically on sophisticated energy management schemes, within which the fuel plays a decisive role. Research here intends to make clear the mechanism of how the energy conversion process of this innovative cycle is driven by properties of the fuel. A unified engine model was developed for analysis, through which it indicates that besides the properties commonly known, the triple point temperature and stoichiometric heat capacity (SHC) of the fuel are also crucial to efficient engine operation. Numerical engine method and the Concorde airplane were proposed to evaluate the synthetic influence of the multiple properties on engine and vehicle performance, with four seemingly promising fuels, i.e., the methane, n-decane, methanol and hydrogen were selected for further assessment. Experiments were performed to evaluate the contribution of chemical endothermic effect (CEE) to SHC. On account of the results, the impacts of the CEE and the quantitative significance of fuel properties on engine and vehicle performance are revealed. Also, it indicates that the system fueled with hydrogen shows superior performances in engine specific impulse and specific thrust, in spite that the corresponding flight range of the vehicle is extremely poor. On the contrary, the systems using hydrocarbon fuels (i.e., methane, n-decane or methanol) exhibit better performance in vehicle flight range, but their related engine-level performances such as the specific impulse/thrust are usually lower than that using hydrogen. Considering this complementary feature, it implies that combined use of several fuels (for instance, hydrogen + kerosene) may provide more balanced and better overall performance than that of the single fuel scheme.

Evolution of Compression Processes in Aero-Engine Thermal Cycles

Stall Margin Improvement in an Axial Compressor by Continuous and Pulsed Tip Injection

Study of a Hybrid Pneumatic-Combustion Engine under Steady-State and Transient Conditions for Transport Application

Aerodynamic limits air injection for heavy-duty gas turbine: Compressor aerodynamic limits for power augmentation and ramp-up capabilities

Thermodynamic Design and Optimization of the Multi-Branch Closed Brayton Cycle Based Precooling-Compression System for a Novel Hypersonic Aeroengine

Computational Study of Heat Exchange and Thermal Oxidative Coking of Supercritical-Pressure Kerosene with Compressed Air in Counterflows

Series View Method Based Thermodynamic Modeling and Analysis for Innovative Precooled Aeroengines with Different Turbine-Compressor Coupling Schemes

Thermodynamic Analysis of Precooled Air Breathing Engine

Thermodynamic analysis for a novel chemical precooling turbojet engine based on a multi-stage precooling-compression cycle

Design Optimization of a High-Speed Twin-Stage Compressor for Next-Gen Aircraft Environmental Control System

Influence of Wet Compression on Operating Performance and Exhausts of Turbojet Engine

Thermodynamic Analysis of Engine Air Compression Cycle for Regenerative Braking

Performance Cycle Analysis of an Open Cooling Cycle for a Scramjet

On compression level of hypersonic airflow in high-mach scramjet

Performance analysis of an aero engine with inter-stage turbine burner

Preliminary Optimization of Multi-Stage Axial-Flow Industrial Process Compressors Using Aero-Engine Compressor Design Strategy

Thermodynamic Analysis for a Novel Steam Rankine Cycle Based Indirect Chemical Precooled Engine Used for Supersonic Flight

Analysis on Energy Transfer System in Air-powered Engine

The Latest Development of Turboshaft Engines

Thermodynamic Investigation of Variable-Speed Compression Unit in Near-Isothermal Compressed Air Energy Storage

Thermodynamic Analysis of the Influential Mechanism of Fuel Properties on the Performance of an Indirect Precooled Hypersonic Airbreathing Engine and Vehicle