Abstract:The interfacial characterization of aligned carbon nanotube/polyimide nanocomposites. The interaction properties can be significantly improved by using conjugated polymers with aromatic rings for carbon nanotube (CNT)‐reinforced composites. In this study, we investigated the influence of the molecular structure of the polyimide (PI) conjugated polymer on the mechanical properties and interfacial characteristics of CNT/PI composites. To that end, nanocomposites composed of aligned multi‐walled carbon nanotubes (MWNTs) and PI with three different molecular structures were examined. Tensile tests, small‐angle x‐ray scattering (SAXS), and molecular dynamics (MD) simulations were conducted, which revealed significant variations in the tensile properties among the three aligned MWNT/PI nanocomposites. The SAXS analyses indicated that MWNT/BPDA‐PDA had the largest interfacial specific surface area, as corroborated by the MD simulation results, which further demonstrated that the rigidity of the molecular structure influenced the extent of wrapping the PI chains around MWNTs. A highly rigid molecular chain hindered the intrachain folding of the PI chain, facilitating better wrapping of the MWNTs and a larger interfacial area. The MWNTs induced conformational changes in the PI chain owing to π–π stacking. Hermans orientation factor revealed that BPDA‐PDA exhibited the highest degree of orientation with MWNTs, whereas BTDA‐MPD displayed the greatest extent of MWNT‐induced conformational changes. The calculated interaction energy confirmed that MWNT/BTDA‐MPD exhibited the strongest interface strength (−41.50 Kcal/mol/nm2), which was 36.32% and 43.03% higher than that of MWNT/BPDA‐ODA and MWNT/BPDA‐PDA, demonstrating its superior tensile properties. This study provides insights into the interfacial characteristics between conjugated polymers and CNTs, which are essential for designing interfaces and developing high‐performance nanocomposites. Highlights Interfacial interaction between polyimide and aligned carbon nanotubes was investigated. Modulation by polyimide structures on the mechanical property of composite was revealed. The rigidity of the polyimide hinders the folding and facilitates the wrapping. The interfacial interaction induces molecular orientation in polyimide can be observed by molecular dynamic simulation.

Shear Enhanced Interfacial Interaction Between Carbon Nanotubes and Polyethylene and Formation of Nanohybrid Shish–kebabs

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Structure and Morphology of Poly(lactic Acid) Stereocomplex Nanofiber Shish Kebabs.

Enhanced Interfacial Properties of High-Modulus Carbon Fiber Composites Via Molecular Assembly on Fiber Surface

Enhancement of pullout energy in a single-walled carbon nanotube-polyethylene composite system via auxetic effect

Preparation of Isotactic Polypropylene-Grafted Multiwalled Carbon Nanotubes (Ipp-G-mwnts) by Macroradical Addition in Solution and the Properties of Ipp-G-Mwnts/Ipp Composites

Sliding Behaviour of Carbon Nanothread Within a Bundle Embedded in Polymer Matrix

External flow-induced highly oriented and dense nanohybrid shish-kebabs: A strategy for achieving high performance in poly (lactic acid) composites

Enhancement of Para-Aramid Fibers by Depositing Poly-P-paraphenylene Terephthalamide Oligomer Modified Multi-Walled Carbon Nanotubes

High-speed Melt Stretching Produces Polyethylene Nanocomposite Film with Ultrahigh Mechanical Strength

Design of a ternary synergistic network of HDPE/BN/CNT composites with an aligned shish-kebab structure for enhanced thermal conductivity and tensile strength

High-Yield Synthesis of Nanohybrid Shish-Kebab Polyethylene-Carbon Nanotube Structure

Lap shear properties of CF/PEKK composites through nanoparticle-enhanced adhesive joints

Enhanced interfacial adhesion of CF/PEEK-titanium hybrid laminates via introducing micro-nano layers with multi-walled carbon nanotube networks

Molecular dynamics simulation of polymer wrapping for interfacial characteristics of aligned carbon nanotube/polyimide nanocomposites

Preparation and Properties of the Polyimide/multi-Walled Carbon Nanotubes (mwnts) Nanocomposites

In situ consolidation process-based fabrication and interlaminar modification mechanism associated with CF/PEEK multiscale nanocomposites characterized by interlaminar doping of CNTs

A study of mechanical behavior and morphology of carbon nanotube reinforced UHMWPE/Nylon 6 hybrid polymer nanocomposite fiber

Unique crystal morphology and tensile properties of injection-molded bar of LLDPE by adding HDPE with different molecular weights

Carbon fiber coating with MWCNT in the presence of polyethyleneimine of different molecular weights and the effect on the interfacial shear strength of thermoplastic and thermosetting carbon fiber composites

The Injected Foaming Study of Polypropylene/Multiwall Carbon Nanotube Composite with In Situ Fibrillation Reinforcement