Treatment of Salicylaldehyde Production Wastewater by Resin Adsorption-Fenton Reagent Oxidation Process

Cheng Weijian,Han Yongzhong,Chu Kaiming
DOI: https://doi.org/10.3969/j.issn.1006-1878.2008.04.016
2008-01-01
Abstract:The resin adsorption-Fenton reagent oxidation process was used in the treatment of salicylaldehyde production wastewater.The removal rates of COD and volatile phenols are more than 85% and 90% respectively in the static adsorption using XF-01 and XF-02 resins.XF-02 resin is more efficient.In the dynamic adsorption,the COD and volatile phenol concentration in the effluent increase with the increasing of the wastewater flux.The optimum wastewater flux is 15 BV,and the optimum desorption temperature is 80 ℃.In the 4-cycle adsorption-desorption experiments,the average COD and volatile phenol concentration in the adsorption effluent are about 1 200 mg/L and less than 10 mg/L respectively.In the experiments of Fenton reagent oxidation,the catalytic effects of iron scrap and iron powder are close,and better than that of FeSO_4·7H_2O.The COD and volatile phenol concentration in the oxidation effluent are below 150 mg/L and 0.5 mg/L respectively when the dosage of H_2O_2 is 1% and scrap iron is used as catalyst.
What problem does this paper attempt to address?